Techniques to evaluate and remediate the slope stability in overconsolidated clay

In this chapter, the origin and remediation of an important sliding in the overconsolidated Boom Clay in Kruibeke (Belgium) is discussed. Local and environmental factors caused an unstable slope about 30 m deep, A larger sensitivity to erosion resulted finally in the instability of the slope. Because of the formation of fine cracks in the soil there was a possibility for the water to penetrate in the clay close to the surface, resulting in the presence of higher water pressures. Also, the presence of the excavator on top of the slope during exploitation had an important impact on the stress state of the soil. Both an analytical and numerical approach were used to estimate the factor of safety. Because of the change of the soil characteristics, the factor of safety decreases, which can be estimated through a numerical analysis (using the Strength Reduction Method). This chapter also discussed the applied techniques for the remediation using numerical analysis. Also, the importance of the field test is discussed. An integrated approach, using numerical analysis and field tests in combination, is capable of predicting the instability. This approach can also be used to evaluate the stability of the slope after remediation