Grundförstärkning med pålar i berg : I befintlig konstruktion med begränsat utrymme

This study has been done in order to examine which type of pile, pile driving- and waterproofing methodsare most suited for an existing building. A building that will undergo an extensive reinforcement of itsfoundation.The study has been made in regard to the following conditions:● Different types of clay soil (Cohesion soil)● Underlying rock structure with heavy incline (8° slope)● Sensitive environment for vibrations and ground displacements● Limited accessibility (Room and maximum weight)● Compressive and tensile forces● Pool (Water environment)To answer the questions of statement a scientific literature study, interview with a foundation expert,calculations in sizing, but also time and cost analysis has been conducted. A site visit to an object ofreference, Nya Krav Himmerfjärdsverket, occurred where a reconstruction of an existing building withextensive work of reinforcement to its’ foundation was in progress.The steel pipe pile with anchor and steel core pile are the best pile types in such conditions as compressiveand tensile forces, clay soil with underlying inclined rock bed, limited accessibility and sensitivesurrounding environment. Which pile type, pile driving- and waterproofing methods that are most suited forsuch conditions is different for each project. The steel core pile is more suitable for higher loads, rockstructures in incline and when verification of load capacity is not needed. At the same time the steel pipepile is more suited when the underlying rock bed is far below ground level, where you would need manypile elements and joints. In addition, the steel pipe pile is suitable for buildings with a complex loaddistribution, where a greater number of piles with lower load capacities is needed in order to satisfy this.The best pile driving method for drilling in sensitive environment is the water equipped down-the-hole(DTH) drill. This drilling method is gentle to surrounding piles in existing building.In order to minimise the risk of water penetration and then expand the life span of the construction, use ofa combination of different waterproofing systems is to prefer when waterproofing pile heads or pilefoundations