Protocol for wireless real-time systems

A protocol and a communication mechanism intended for time and safety critical applications using a radio channel for information transport are considered jointly. The protocol is based on a scheme of retransmissions done on demand within a given time window. Each retransmission is coded with a varying number of redundant symbols. The set of blocks used for retransmission is controlled by two quality-of-service parameters: deadline for the transmission and the probability that the correct decoded message will reach the recipient before this deadline. Analysis of a protocol model indicates that it is possible to transmit time critical information in a mobile wireless system with very low error probabilities in an industrial environment.Copyright © 1999 IEEE. Reprinted from the Euromicro 1999 proceedings. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of the University of Halmstads's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.