Abstract: The precipitation of supersaturated solutes at free surfaces in ternary Fe–3Au–4W and binary Fe–3Au and Fe–4W alloys (composition in weight percentage) for different ageing times was investigated at a temperature of 700 °C. The time evolution of the surface precipitation is compared among the three alloys to investigate the interplay between the Au and W solutes in the ternary system. The Au-rich grain-interior surface precipitates show a similar size and kinetics in the Fe–Au–W and Fe–Au alloys, while the W-rich grain-interior surface precipitates show a smaller size and a higher number density in the Fe–Au–W alloy compared to the Fe–W alloy. The kinetics of the precipitation on the external free surface for the ternary Fe–Au–W a...
An ultrafine-grained (UFG) Al–Cu–Mg alloy (AA2024) was produced by surface mechanical grinding treat...
A series of Ag-AI bulk alloys was made by argon arc melting, while thin films of these alloys were p...
The precipitation of primary Fe-bearing compounds in a secondary AlSi9Cu3(Fe) alloy has been investi...
Abstract: The precipitation of supersaturated solutes at free surfaces in ternary Fe–3Au–4W and bina...
The precipitation of Au-rich precipitates on the external surfaces of Fe-Au alloys has been studied ...
Autonomous healing of creep-induced grain boundary cavities by Au-rich and W-rich precipitates was s...
The chapter characterizes wrought iron-base superalloys and comprises two main parts. The first desc...
Self-healing materials have recently drawn the attention of industry as a new solution to the degrad...
This research is concerned with identifying and characterizing four solid-state precipitati...
The effect of thermal aging of homogenized Fe-Au and Fe-Au-W alloys, irradiated at room temperature ...
A series of Ag-A1 bulk alloys was made by argon arc melting, while thin films of these alloys were p...
The role of AlTi5B1 grain refinement and the cooling rate on the formation behaviour of Fe-rich comp...
International audienceA Co-Ni-based alloy strengthened by γ′-(L12) precipitates was utilized to inve...
The effect of grain refiner addition on the precipitation of Fe-rich compounds in secondary AlSi7Cu3...
Precipitation in deformed and undeformed Al-300 ppm Fe alloy has been investigated by means of resis...
An ultrafine-grained (UFG) Al–Cu–Mg alloy (AA2024) was produced by surface mechanical grinding treat...
A series of Ag-AI bulk alloys was made by argon arc melting, while thin films of these alloys were p...
The precipitation of primary Fe-bearing compounds in a secondary AlSi9Cu3(Fe) alloy has been investi...
Abstract: The precipitation of supersaturated solutes at free surfaces in ternary Fe–3Au–4W and bina...
The precipitation of Au-rich precipitates on the external surfaces of Fe-Au alloys has been studied ...
Autonomous healing of creep-induced grain boundary cavities by Au-rich and W-rich precipitates was s...
The chapter characterizes wrought iron-base superalloys and comprises two main parts. The first desc...
Self-healing materials have recently drawn the attention of industry as a new solution to the degrad...
This research is concerned with identifying and characterizing four solid-state precipitati...
The effect of thermal aging of homogenized Fe-Au and Fe-Au-W alloys, irradiated at room temperature ...
A series of Ag-A1 bulk alloys was made by argon arc melting, while thin films of these alloys were p...
The role of AlTi5B1 grain refinement and the cooling rate on the formation behaviour of Fe-rich comp...
International audienceA Co-Ni-based alloy strengthened by γ′-(L12) precipitates was utilized to inve...
The effect of grain refiner addition on the precipitation of Fe-rich compounds in secondary AlSi7Cu3...
Precipitation in deformed and undeformed Al-300 ppm Fe alloy has been investigated by means of resis...
An ultrafine-grained (UFG) Al–Cu–Mg alloy (AA2024) was produced by surface mechanical grinding treat...
A series of Ag-AI bulk alloys was made by argon arc melting, while thin films of these alloys were p...
The precipitation of primary Fe-bearing compounds in a secondary AlSi9Cu3(Fe) alloy has been investi...