Aerosols of Isocyanates, Amines and Anhydrides : Sampling and Analysis

This thesis presents methods for air sampling and determination of isocyanates, amines, aminoisocyanates and anhydrides. These organic compounds are generated during thermal degradation of polymers such as polyurethane (PUR) or epoxy. Isocyanates, amines and anhydrides are airway irritants known to cause occupational asthma. Some of the compounds are listed as human carcinogens. Many workers are exposed. Isocyanates and anhydrides are reactive and needs to be immediately derivatized during sampling. Methods have been developed for determination of airborne isocyanates, aminoisocyanates and anhydrides using di-n-butylamine (DBA) as reagent to form stabile urea derivatives or amide derivatives. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) enabled detection limits as low as 10 attomoles. A nitrogen-selective LC-detector enabled quantification of DBA-derivatives in reference solutions. A novel sampler is presented. The sampler consists of a denuder in series with a three-stage cascade impactor and an end filter. The sampler made it possible to reveal the distribution of isocyanates between gas and different particle size fractions. During thermal degradation of PUR, isocyanates were associated to particle size fractions (<1 µm) that may penetrate to the lower airways. The distribution during 8 minutes changes noticeably. Aromatic isocyanates become associated to small particles (<1 µm). As a reference method, air-sampling was performed using an impinger filled with di-n-butylamine (DBA) in toluene, connected in series with a glass fiber filter. There was a good agreement between the denuder-impactor sampler and the reference method