Abstract. The influence of irradiation on the structural properties of titanium nitride films deposited on silicon wafers has been considered. It has been shown that depending on the energy, fluence and type of irradiation ion, observed are the increase of accumulated damages with decreasing the grain size, the grain size reduction with increasing the fluence, the increase of dislocation density and microstrains
[[abstract]]The effect of operation parameters, bias and nitrogen partial pressure in the microstruc...
One of the essential tasks of modern materials science is the studying of the interaction of various...
Abstract: Titanium nitride thin films deposited by reactive dc magnetron sputtering under various su...
This paper reports on a study of microstructrual changes in TiN/Si bilayers due to 200 key Ar+ ions ...
Modification in structural, optical and electrical properties of titanium nitride (TiN) thin films i...
The present study deals with irradiation effects induced by xenon ions (Xe+ on titanium nitride (TiN...
The effect of substrate orientation and ion bombardment during the growth on the structure and prope...
Polycrystalline and microcrystalline materials grown as thin films often exhibit a preferred crystal...
In this work, the effects of 120 keV Ar+ ion implantation on the structural properties of TiN thin f...
In this work the surface of (4 0 0) p-type Si wafers is bombarded with 29 keV nitrogen ions at vario...
Ion bombardment during thin film growth is known to cause structural and morphological changes in th...
The present study deals with TiN/Si bilayers irradiated at room temperature (RT) with 120 keV Ar ion...
The low energy broad argon ion beam (1.35-2.0) keV was used for sputtering of a Ti target in an atmo...
By in-situ transmission electron microscopy (TEM), we performed a detailed study on the electron-bea...
The effects of various experimental conditions on the preferred orientations of titanium nitride (Ti...
[[abstract]]The effect of operation parameters, bias and nitrogen partial pressure in the microstruc...
One of the essential tasks of modern materials science is the studying of the interaction of various...
Abstract: Titanium nitride thin films deposited by reactive dc magnetron sputtering under various su...
This paper reports on a study of microstructrual changes in TiN/Si bilayers due to 200 key Ar+ ions ...
Modification in structural, optical and electrical properties of titanium nitride (TiN) thin films i...
The present study deals with irradiation effects induced by xenon ions (Xe+ on titanium nitride (TiN...
The effect of substrate orientation and ion bombardment during the growth on the structure and prope...
Polycrystalline and microcrystalline materials grown as thin films often exhibit a preferred crystal...
In this work, the effects of 120 keV Ar+ ion implantation on the structural properties of TiN thin f...
In this work the surface of (4 0 0) p-type Si wafers is bombarded with 29 keV nitrogen ions at vario...
Ion bombardment during thin film growth is known to cause structural and morphological changes in th...
The present study deals with TiN/Si bilayers irradiated at room temperature (RT) with 120 keV Ar ion...
The low energy broad argon ion beam (1.35-2.0) keV was used for sputtering of a Ti target in an atmo...
By in-situ transmission electron microscopy (TEM), we performed a detailed study on the electron-bea...
The effects of various experimental conditions on the preferred orientations of titanium nitride (Ti...
[[abstract]]The effect of operation parameters, bias and nitrogen partial pressure in the microstruc...
One of the essential tasks of modern materials science is the studying of the interaction of various...
Abstract: Titanium nitride thin films deposited by reactive dc magnetron sputtering under various su...