Managing smaller but flexible automation: back to the futurey Development of automation for drug discovery

Practical robotics tools were introduced to the analytical chemistry laboratory about 20 years ago with the development of the Zymate I robot by Zymark Corporation (Hopkington, MA, USA). These tools quickly migrated within the various parts of the research divisions into biology and biochemistry laboratories at pharmaceutical companies to support the new discipline of high-throughput random screening. These systems were small scale and often reconfigured for new screens because of small numbers of compounds in collections at that time. Over the last 10 years, however, these systems have matured, and it became clear that laboratory automation was becoming a reliable tool for drug discovery. Over this period, management in the pharmaceutical research industry was convinced that this technology and approach was a productivity enhancing tool and invested heavily in infrastructure and people to implement it. During this time, three other trends contributed to the momentum towards large dedicated 'industrialized' screening operations. One was the proliferation of molecular targets that were being produced by the genomics revolution; the second the move towards detection technologies that were either homogeneous or semihomogeneous eliminating many of the separation steps in assays; and the third the development of large combinatorial chemistry/parallel synthesis capability in the research organizations, often linked to very largescale compound collections and compound management systems. The result has been the move towards assembly line-like automation (e.g. Allegro TM and other conveyer-based systems) and the move towards ultra-miniaturization and ultrahigh throughput (e.g. Evotec and Aurora). As a result, the use of workstation and smaller flexible automation approaches has largely remained localized within biotechnology companies or therapeutic biology units with the larger pharmaceutical organizations where large support groups or capital to support these large dedicated automation systems do not exist. Decline in approval in new chemical entities as drugs However, despite trends to make chemistry in lead optimization more efficient ('kill early and kill often'), it is clear from a number of seminal presentations over the last year or so These same analysts are now reassessing whether or not continued investment in traditional HTS can bring about the revolution in NCE discovery that had been promised from this investment in resources What are the explanations for this dearth of NCEs? A number of suggestions have been put forward (including the suggestion that we have not had time for the new drugs from the HTS revolution to make it through the regulatory pipeline), but the most likely reason is that the drug-discovery paradigm has been transformed. It is increasingly being focused on large numbers of single molecular targets. Also the 'industrialization' of HTS has contributed to the momentum towards screening targets that are easy to pursue rather than ones that are the most biologically relevant. For example, this reliance on single, specific molecular targets, such as GPCR subtypes, yield very highly potent and specific compounds, but they do not provide the desired physiological result in vivo. This is especially true in the central nervous system (CNS), where GPCRs that have been targeted by very highly specific and potent compounds in vitro, but these compounds have turned out to be ineffective in man. Aripiprazole is one example of a recently approved CNS active compounds that is effective in vivo, and is one that shows mixed receptor activity. The use of mixed serotonin/norepinephrine reuptake inhibitors are other examples of drugs that are more effective than compounds that target either of the individual reuptake system alone. Another probable reason is that early combinatorial chemistry programs produced large numbers of compounds that could be easily made rather than the effort being used to generate 'druggable' molecules, i.e quantity over quality. The trend is now towards more intelligent library design, but even now parallel synthesis is still producing compounds that have inherent flaws in ADMET parameters such as poor solubility, poor absorption, drug-drug interactions and susceptibility to first-pass metabolism. In vitro and in silico tools to 'fail fast' compounds from parallel synthesis programs are being applied but they need to move towards the application of these methods in the design of primary screening libraries, in addition to their application to lead optimization stages. A third likely reason is the momentum towards the use of mix and measure primary screening assays. This has lead to the use of targets that can be easily established, rather than a consideration of whether these are relevant targets. Although many of them are, in fact, specific single 'druggable' molecular targets, they are the 'low hanging fruit' of target classes. Over the last 10 years, this 'fruit' has been extensively harvested (e.g. GPCRs, kinases, proteases, ion channels), and whilst examples of these still remain as potential targets, most have been extensively exploited. These classes also represent some of the last examples of therapeutic intervention at targets where there can be seen to be a linkage between cause and effect. However, this target focus is rapidly reaching the point of diminishing returns as it is understood that many of the remaining orphan receptors are involved in complex interactions. In addition, whilst it is possible to screen in cell-based systems using the 'industrialized' approach, this is not typically done using these ultrahigh-throughput automated approaches. Looking towards the future: high information-content screens Collectively, then, this move towards large-scale and ultrahigh throughput has been facilitated by the availability of cloned single molecular targets from the genomics revolution, the explosion in compounds available for screening through automated combinatorial and parallel chemical synthesis and the commercialization of generic homogeneous and semi-homogeneous mix and measure reagents and detection technologies. However, the diseases that have the most unmet medical need are those that are the most complex (e.g. diabetes, obesity, mental illness). These complex diseases are the result of interactions of many different regulatory and feedback systems that translate the effects of multiple genes on an individual's susceptibility to a disease, its severity and progression with environmental influences and triggers. If we consider a systems biology approach, then it is likely that new treatments will come from a polyvalent effect of new drugs, i.e. an effect in which a single compound affects multiple cellular processes, yielding the desired therapeutic effect. It is also likely that the targets for such compounds are more likely to be intracellular signalling nodes in pathways that act on gene expression patterns that influence the downstream processes. This would also help to explain the delayed onset of action of many CNS agents, where one can imagine that gene expression changes are followed by modulation of protein expression as the ultimate cellular event, rather than the immediate effect of these compounds on cell surface receptors. In order ultimately to understand these diseases, it will be necessary to unravel and integrate the systems biology involved. However, from a drug-discovery perspective, the important message to be taken from this concept is that a systems biology approach to screening is needed, and that this holds better promise for discovery of truly novel therapeutics for treatment of these complex disorders. Often these diseases are currently being treated with poly-pharmacology, e.g. in mental illness or in obesity, and a paradigm shift toward the use of polyvalent drugs may be a solution to this problem of using multiple drugs in a poly-pharmacologic approach. All this suggests that an approach needs to be developed that is both novel and, for example, directed towards measuring the effect of gene expression when searching for novel therapeutics. This is the direction that we are pursuing at Psychiatric Genomics, Inc. We are are also tackling this problem by using in vitro cell-based screening systems rather than isolated biochemical targets. These types of screens measure many parameters simultaneously, and thus they will be very information rich with the potential for yielding both better information on the effects of compounds on multiple targets simultaneously and have the potential for the discover of novel therapeutics more rapidly. Drug discovery using the Multi-Parameter High Throughput Screen (MPHTS SM ) As indicated above, Psychiatric Genomics is using gene expression assays to approach the complex psychiatric diseases of bipolar, schizophrenia and depression. Implementation of the assay The multiparameter approach that Psychiatric Genomics is using is high in information content, but is also very complex to implement. A description of the assay protocol will been given in detail in another paper at this conference Learning from the past (back to the future!) The successful management of the automation for such an assay in a biotechnology company environment has resulted in a return to the flexible philosophy of laboratory automation that had been practised in the early days of the implementation of robotics for high-throughput screening. In these early days of laboratory automation, the accessories for the various unit operations of an assay were often not available and had to be built from scratch. In addition, it became clear that certain unit operations were not robot 'friendly' and that the goal of achieving complete assay automation was either impossible or meant adjusting the assay procedure to a new protocol with consequent revalidation of the assay. Nevertheless, using a combination of semibatch automation and manual intervention satisfactory progress towards highthroughput screening goals was achieved. This type of semibatch automation became anathema to many of the practitioners of industrialized automation, and thus fell out of favour. However, what was true then is true now when we want to implement these novel high-information content screens with a reduced but more focused and smaller compound libraries. Then, as now, since throughputs in high-throughput screening groups were not large, and often because compound collections even at major pharmaceutical companies were small, historically this frequently meant that the robot systems were continually being reconfigured as assays came and went during the attrition process in the screening group, and required a cadre of people with special talents who could cope with the need for systems that required this constant attention. An example of the semibatch type of operation was used in early cell-based assays, such as the cytotoxicity screens set up in the early days of automation by my (then) group at Bristol-Myers Squibb. In this system, additions of test compounds to the microplates containing the growing cells were automated using a large tracked system containing staging CO 2 incubators. The overnight growth was performed off-line by manual removal of the plates from the staging incubators, and the plates with cells returned to the system for processing for measurement of cell viability after 24 or 48 h growth, again this return process being a manual step. This type of semibatch operation is especially well suited to high-volume cell-based screens, where it is undesirable to tie up limited robotic resources just for storage and incubation for long periods. The throughput of cell-based assays often is lower than traditional homogeneous single molecular target assays. However, when optimized, throughputs can still be quite considerable and adequate for high-priority important targets. We had many of the same challenges automating this assay as I did with these previous cell-based assays. The need to maintain sterility is important during the growth phase of the cells, but the current assay has the complication that we cannot use antibiotics to maintain sterility, because of the effects that exposure to these compounds has on gene expression. This means that special precautions and process operations are needed to ensure sterile operation. In addition, the times involved in the various steps vary widely, the basic manipulations are more complex than are usual (i.e. there are a number of high temperature nucleic acid hybridizations steps involved, plus associated wash steps, followed by addition of chemiluminescence reagents and a time-dependant light signal readout) and commercial high-temperature ovens that were compatible with automation were not available. Despite these challenges, and following their solution by means outlined below, the final screening throughput is comparable with some other complex cell-based assays such as the intracellular measurement of calcium using fluorescent dyes and the FLIPR TM (Molecular Devices, Sunnyvale, CA, USA). At NPS Pharmaceuticals (Salt Lake City, UT, USA), for example, my (then) screening group routinely ran 65 96-well plates/day in an entirely manual mode, assisted by some liquid-handling workstations for sample preparation. Once fully operating, our multiplexed gene expression assay should reach comparable throughput, and thus would be adequate to screen rapidly quite large-sized compound collections at about 32 000 compounds/month. Management decisions based on past experience (back to the future -part II!) We required a system that was both state-of-the-art and able to be configured to work in a semi-automated fashion. Since we were using a cell-based assay with a minimicroarray-based detection system that required quite long incubation times, this was incompatible with the utilization of valuable robotic resources for the cell growth steps. In addition, just as in the early days, the need to use the system for both assay development and walk up utilization of the peripherals for other non-array-based assays (with a limited budget) precluded complete duplication of the peripherals on the robotic system. We thus needed to include multiuse into the design of the system. As described, this is not the typical mix and read homogeneous reaction that can be easily automated at ultrahigh throughput! So careful management of the decisions about what sort of automation to employ was essential to establishing a successful high-throughput screening paradigm. One of the initial choices to be made was whether to take a workstation, dedicated automation or integrated, yet flexible automation approach. The decision to go with a integrated, flexible robotic system based on a CRS tracked robotic arm was partly dictated by the fact that whilst we were in the process of establishing automation for other internal screens (GPCRs) we did not know the exact assay protocol for the MPHTS SM system. Thus, we chose the CRS system based on our ability to use it as an integrated robotic platform, but also viewed it as an integrated single workstation as necessary. It also had the advantage that our automation support personnel had extensive experience with the system and was able to use the scheduler later to assist in workflow optimization. The choice of peripherals was also based on the need to use these on an open access basis during assay development for the MPHTS SM as well as our other single target GPCR assays. Managing the automation not only has required us to examine carefully the workflows through the system to optimize throughput, but also has required us to integrate the automation of a CCD camera system originally designed for one-shot manual operation. Fortunately, we had the staff able to design and construct a custom automated solution to feed plates from the robot to the camera. Also, the judicious use of a summer intern programme allowed us to develop software that allowed for automated image capture and analysis has allowed us remove this bottleneck to the HTS process. These two approaches to developing solutions is again reminiscent of the early days of high-throughput automated system development that allowed a system to evolve from prototype to robust implementation through skilled system design and construction. My experience with other automated cell-based systems at Bristol-Myers Squibb and at NPS Pharmaceuticals ensured that we focused on the integration of other workflow processes to ensured that the system works without bottlenecks. These included the development of a robust system for routinely producing cells in the correct physiological stage for the assay in large quantities, the compound and plate management tools for maximizing the hit rate and retest process, and the development of advanced data analysis methods to handle the large quantities of multiparametric data produced by this high information content screen. Results and data processing The results returned from this type of screen are a very complex and information-rich data set. The system is designed to screen compounds that affect a multiplexed gene expression pattern in a highly parallel fashion, and its early implementation with a six-gene assay has identified compounds that mimic the gene expression effect of a marketed bipolar therapeutic. It has demanded that we not only use an industrial-strength database to store the results (ActivityBase, IDBS, Guildford, UK), but also even with this database the challenges in constructing templates to upload and analyse data from a complex multiparameter screen are enormous, since the database is essentially designed to handle univariate data. This has meant that we have had to develop and implement tools that can analyse data in a multidimensional result space. Of the multiple gene probes in the mini-arrays in the bottom of each microplate well, some genes are 'test' genes and reveal the effect of the compound on the up or down regulation (or no effect on regulation) of that particular gene. Since we have started with a profile of gene expression levels as the target cut-off in the assay, we can easily identify compounds that meet the criteria for the signature. In addition, we can mine the data set for gene expression pattern changes that can yield compounds that can be useful both as tools to explore the biochemistry of these events, or as a drug for a disease where a compound producing a different signature is desired. As we continue to add MPHTS SM screens to our portfolio, the data warehouse being build rapidly builds in value and can be mined for future signature targets without having to screen physically the entire compound deck. Ongoing assay optimization and management There are tradeoffs to be made using this technology. The cost per assay plate is high compared with assays in traditional format, but the cost per datum point is not inconsistent with other complex HTS being run using expensive, rare reagents. However, experience suggests that both volume usage and incremental improvements in the technology will drive costs down significantly. This has been our experience in the past as any pioneering assay technology becomes more mature. Meanwhile, measures can be taken to improve the cost/ benefit of the MPHTS SM . One is to use the power of chemo-informatics to prioritize plate management through the screen to maximize SAR information from primary screening. We have seen an example of how this might be done, using the earlier six-gene version of the MPHTS SM system. We were able to do a similarity search on a standard of known molecular structure used in the assay validation to prioritize a small set of compounds plates to be screened first in the assay. From two 'hits' obtained from one of these plates, we prioritized an additional set of compound library plates based on a refined structure similarity match and increased the 'hit' rate threefold. One continuing challenge for us is to implement the necessary compound management resources to utilize this approach fully. With more effective compound management systems, other people have used in silico techniques to cluster screening compounds, to select a subset of the compounds as being representative of the clusters, re-plate and reformat these into smaller screening sets. Follow up of 'hits' by retesting nearest neighbours resulted in an increased hit rate in this secondary round. Frank Brown at Merck Summary We believe that this approach to high-throughput screening not only will yield more effective and novel therapies for psychiatric disease, but also will do it in a more effective and rapid manner, one that will overtake traditional single-target HTS approaches. The system that we have put together based on experience in developing flexible, small-scale and reconfigurable automation shows that the future of highcontent cell-based assays can be achieved with limited resources and without the need for large-scale 'industrial' automation and suggests that the future of drug discovery lies less with huge, inflexible 'industrialized' systems than more nimble flexible automation. Just as the PC destroyed the mainframe, and just as the Internet destroyed point-to-point telecommunications, will flexible automation destroy industrialized high-throughput screening or will they coexist as mainframes as the telephone coexists with PCs and the Internet? However, the results achieved to date with our 6-gene MPHTS SM system suggest that a multiparametric approach to drug discovery has the potential to be