Measurement of Biochemical Methane Potential of Heterogeneous Solid Substrates: Results of a Two- Phase French Inter-Laboratory Study

International audienceBiochemical methane potential (BMP) is essential to determine the production of methane for various substrates; literature shows important discrepancies for the same substrates. In this paper, a harmonized BMP protocol was developed and tested with two phases of BMP tests carried out by eleven French laboratories. Surprisingly, for the three same solid tested substrates (straw; raw mix and dried-shredded mix of potatoes, maize, beef meat and straw; and mayonnaise), the standard deviations of the repeatability and reproducibility inter-laboratory were not enhanced by the harmonized protocol (average of about 25% depending on the substrate), as compared to a previous step where all laboratories used their own protocols. Moreover, statistical analyses of all the results, after removal of the outliers (about 15% of all observations), did not highlight significant effect of the operational effect on BMP (stirring, automatic or manual gas quantification, use of trace metal, uses a bicarbonate buffer, inoculum to substrate ratio) at least for the tested ranges. On the other hand, the average intra-laboratory repeatability was low, about 7%, whatever the protocol, the substrate and the laboratory. It also appears that drying the SA substrate, which contained proteins, carbohydrates, lipids and fibers, does not impact its BMP