Kinetic study of 4-nitrophenol photocatalytic degradation over a Zn2+ doped TiO2 catalyst prepared through an environmentally friendly aqueous sol-gel process

A kinetic study of the photocatalytic degradation of 4-nitrophenol (4-NP) under UV-visible light (330nm < λ < 800nm) has been performed via a rigorous chemical engineering approach over a Zn2+ doped TiO2 catalyst prepared through an environmentally friendly aqueous sol-gel process. The experiments have been performed at three temperatures to enable the global activation energy to be estimated. The influence of the illumination intensity has also been considered. The possibility of internal and external diffusion limitations has been studied and the results obtained demonstrated that there is no diffusional limitation during the photocatalytic degradation of the 4-NP using the selected catalyst. Therefore, the apparent specific reaction rate measured corresponds to the actual reaction rate of the chemical reaction. Parameter adjustments show that the kinetic model that provides the best fit to the experimental data corresponds to a first order reaction. A sequence of elementary steps has been considered and a pseudo-steady state approach based upon the stationary state hypothesis for reaction intermediates has been applied to obtain a kinetic rate expression in agreement with the experimental data. The mean values of the reaction rate constant found at 283 K, 288 K and 293 K are respectively equal to k1 = 0.094 ± 0.003 m3 h-1 kgcatalyst-1; k2 = 0.119 ± 0.004 m3 h-1 kgcatalyst-1 and k3 = 0.150 ± 0.023 m3 h-1 kgcatalyst-1 and the global activation energy of the degradation reaction was evaluated as 40 kJ mol-1. A phenomenological kinetic mechanism is proposed to describe the reaction at a molecular scale. Finally, statistical validations and residuals analysis have been performed to confirm that the first order model is suitable to represent the 4-NP photocatalytic degradation over time. Such studies are essential to design a reactor for water pollutant degradation on an industrial scale. NOTE: SOME OF THE SCIENTIFIC SYMBOLS CANNOT BE REPRESENTED CORRECTLY IN THE ABSTRACT. PLEASE READ WITH CAUTION AND REFER TO THE ORIGINAL ARTICLE