Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to address material migration issues in fusion devices. Optical emission spectroscopy and mass loss measurements have been employed to quantify gross chemical erosion and net erosion yields, respectively. Effects of the ion impact energy and target geometry on carbon erosion yields have been studied. It is concluded that temporal evolution of gross chemical erosion is strongly connected with changes in morphology of plasma-exposed surfaces. The net carbon erosion yield is increased when the targets are partly covered by insulating boron-nitride rings
\u3cp\u3eFast deposition of graphitic carbon layers by an expanding cascaded arc plasma has been stu...
Net erosion rates of carbon target plates have been measured in situ for the DIII-D lower divertor. ...
Using the DiMES mechanism at DIII-D, erosion rates of graphite, and metallic coatings of Be, V, Mo, ...
Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to addr...
Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to addr...
The chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for ITER diver...
The chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for ITER diver...
\u3cp\u3eThe chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for I...
In a collaboration of eight experiments the dependence of the chemical erosion yield of carbon on th...
Published data on chemical erosion of graphite in present fusion devices obtained by spectroscopy ar...
Carbon materials could be used for divertor plates in the ITER fusion device. Numerous studies (expe...
Graphite and advanced carbon fiber composites (CFC) are widely used inside the vacuum vessel of magn...
We have studied the chemical erosion of different carbon composites in Pilot-PSI at ITER-relevant hy...
Carbon net erosion and deposition at the test divertor unit (TDU) of Wendelstein 7-X (W7-X) were mea...
The chemical erosion of carbon in interaction with a hydrogen plasma has been studied in detail in i...
\u3cp\u3eFast deposition of graphitic carbon layers by an expanding cascaded arc plasma has been stu...
Net erosion rates of carbon target plates have been measured in situ for the DIII-D lower divertor. ...
Using the DiMES mechanism at DIII-D, erosion rates of graphite, and metallic coatings of Be, V, Mo, ...
Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to addr...
Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to addr...
The chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for ITER diver...
The chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for ITER diver...
\u3cp\u3eThe chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for I...
In a collaboration of eight experiments the dependence of the chemical erosion yield of carbon on th...
Published data on chemical erosion of graphite in present fusion devices obtained by spectroscopy ar...
Carbon materials could be used for divertor plates in the ITER fusion device. Numerous studies (expe...
Graphite and advanced carbon fiber composites (CFC) are widely used inside the vacuum vessel of magn...
We have studied the chemical erosion of different carbon composites in Pilot-PSI at ITER-relevant hy...
Carbon net erosion and deposition at the test divertor unit (TDU) of Wendelstein 7-X (W7-X) were mea...
The chemical erosion of carbon in interaction with a hydrogen plasma has been studied in detail in i...
\u3cp\u3eFast deposition of graphitic carbon layers by an expanding cascaded arc plasma has been stu...
Net erosion rates of carbon target plates have been measured in situ for the DIII-D lower divertor. ...
Using the DiMES mechanism at DIII-D, erosion rates of graphite, and metallic coatings of Be, V, Mo, ...