Add to ORKG312-318In this research, synthetic leather samples have been produced using polyvinyl chloride film and three types of reinforcing polyester fibre fabrics, namely woven, knitted, and nonwoven, with similar areal weights. The samples are then subjected to tensile, trapezoid tear and bursting tests. The effect of structural parameters of the reinforcing fabrics on the mentioned properties has been analyzed and discussed. Based on the results, woven fabric reinforced leathers show the highest tensile and bursting strength, followed by knitted and nonwoven fabrics reinforced ones respectively. The highest tear strength value is observed in the nonwoven reinforced samples
267-272The influence of structural parameters of coated fabrics and laminates on the breaking force...
WOS: 000309571200004Strength deals with the durability of materials during usage and therefore is an...
WOS: 000375238600007Finishing is the process in which a polymeric coating is applied in order to imp...
In this research, synthetic leather samples have been produced using polyvinyl chloride film and thr...
The aim of the research was to find out the effect of the a strenght of to sysnthetic leather conser...
The aim of the research was to find out the effect of the a strenght of to sysnthetic leather conser...
This study investigated the modification of leather rupture properties following impregnation with p...
Laminated leather, obtained by the bonding of the microporous polyurethane film to split leather sur...
Abstract: Speciality coated fabrics combine the beneficial properties of a textile and a polymer, th...
Thin grain leathers were taken from bovine sides and composites formed by saturation. Leather and co...
Leather is not a uniform material from a structural perspective. The physical properties of leather ...
In this article, in 3 different variants, ie in option 1, 50x1 textile cotton with 25x1 textile silk...
[[abstract]]This study creates the high resilience nonwoven fabrics by using modified polyester fibe...
Nonwoven-reinforced composites were produced using both low modulus fibres (lyocell, polyethylene te...
Strength deals with the durability of materials during usage and therefore is an important criterion...
267-272The influence of structural parameters of coated fabrics and laminates on the breaking force...
WOS: 000309571200004Strength deals with the durability of materials during usage and therefore is an...
WOS: 000375238600007Finishing is the process in which a polymeric coating is applied in order to imp...
In this research, synthetic leather samples have been produced using polyvinyl chloride film and thr...
The aim of the research was to find out the effect of the a strenght of to sysnthetic leather conser...
The aim of the research was to find out the effect of the a strenght of to sysnthetic leather conser...
This study investigated the modification of leather rupture properties following impregnation with p...
Laminated leather, obtained by the bonding of the microporous polyurethane film to split leather sur...
Abstract: Speciality coated fabrics combine the beneficial properties of a textile and a polymer, th...
Thin grain leathers were taken from bovine sides and composites formed by saturation. Leather and co...
Leather is not a uniform material from a structural perspective. The physical properties of leather ...
In this article, in 3 different variants, ie in option 1, 50x1 textile cotton with 25x1 textile silk...
[[abstract]]This study creates the high resilience nonwoven fabrics by using modified polyester fibe...
Nonwoven-reinforced composites were produced using both low modulus fibres (lyocell, polyethylene te...
Strength deals with the durability of materials during usage and therefore is an important criterion...
267-272The influence of structural parameters of coated fabrics and laminates on the breaking force...
WOS: 000309571200004Strength deals with the durability of materials during usage and therefore is an...
WOS: 000375238600007Finishing is the process in which a polymeric coating is applied in order to imp...