In soil stabilisation, the use of alternative products to lime or cement has been proposed. However, the effects of these additives, of various origins, on soil behaviour and stabilizing mechanisms are not well understood. Thus, the aim of this paper is to characterize the modification of the mechanical behaviour and microstructure of two soils after treatment with one of those product, a vinyl based copolymer. After treatment, both materials were compacted up to their maximum dry density. The mechanical behaviour of the materials as a function of the curing conditions, suction and water content was first determined. In a second step, the alteration of the microstructure by the treatment product was assessed. The results showed that the tre...
In this paper, chemical stabilizer was used for soil characteristics improvement. Styrene Butadiene ...
An attempt has been made to bring out the influence on strength and volume change behavior of fabric...
In this study, the influence of two chemical additives, (i.e., poly(vinyl alcohol), PVA and 1,2,3,4 ...
In soil stabilisation, the use of alternative products to lime or cement has been proposed. However,...
In soil stabilisation, the use of alternative products to lime or cement has been proposed. However,...
In soil stabilisation, the use of alternative products to lime or cement has been proposed. However,...
GDS;VJ Tech4th European Conference on Unsaturated Soils, E-UNSAT 2020 -- 19 October 2020 through 21 ...
The stabilisation of soils with additives is a chemical process that can be used to improve soils th...
Geopolymers are obtained by use of alteration of chemical composition and crystal structures of diff...
Organic soil is known as low strength material, and chemical stabilization is widely used to increas...
Organic soil is known as low strength material, and chemical stabilization is widely used to increas...
7th International Symposium on Deformation Characteristics of Geomaterials, IS-Glasgow 2019 -- 26 Ju...
In this paper, chemical stabilizer was used for soil characteristics improvement. Styrene Butadiene ...
In this paper, chemical stabilizer was used for soil characteristics improvement. Styrene Butadiene ...
This paper introduces new soil stabilisers for reducing the swelling potential of expansive soils. I...
In this paper, chemical stabilizer was used for soil characteristics improvement. Styrene Butadiene ...
An attempt has been made to bring out the influence on strength and volume change behavior of fabric...
In this study, the influence of two chemical additives, (i.e., poly(vinyl alcohol), PVA and 1,2,3,4 ...
In soil stabilisation, the use of alternative products to lime or cement has been proposed. However,...
In soil stabilisation, the use of alternative products to lime or cement has been proposed. However,...
In soil stabilisation, the use of alternative products to lime or cement has been proposed. However,...
GDS;VJ Tech4th European Conference on Unsaturated Soils, E-UNSAT 2020 -- 19 October 2020 through 21 ...
The stabilisation of soils with additives is a chemical process that can be used to improve soils th...
Geopolymers are obtained by use of alteration of chemical composition and crystal structures of diff...
Organic soil is known as low strength material, and chemical stabilization is widely used to increas...
Organic soil is known as low strength material, and chemical stabilization is widely used to increas...
7th International Symposium on Deformation Characteristics of Geomaterials, IS-Glasgow 2019 -- 26 Ju...
In this paper, chemical stabilizer was used for soil characteristics improvement. Styrene Butadiene ...
In this paper, chemical stabilizer was used for soil characteristics improvement. Styrene Butadiene ...
This paper introduces new soil stabilisers for reducing the swelling potential of expansive soils. I...
In this paper, chemical stabilizer was used for soil characteristics improvement. Styrene Butadiene ...
An attempt has been made to bring out the influence on strength and volume change behavior of fabric...
In this study, the influence of two chemical additives, (i.e., poly(vinyl alcohol), PVA and 1,2,3,4 ...