Strontium titanate SrTiO3(100), (110), and (111) single crystals, undoped or donor doped with up to 1 at% La, were isothermally equilibrated at temperatures between 1523 and 1773 K in synthetic air followed by two different methods of Sr tracer deposition: ion implantation of Sr-87 and chemical solution deposition of a thin (SrTiO3)-Sr-86 layer. Subsequently, the samples were diffusion annealed under the same conditions as before. The initial and final depth profiles were measured by SIMS. For strong La-doping both tracer deposition methods yield similar Sr diffusion coefficients, whereas for weak doping the tracer seems to be immobile in the case of ion implantation. The Sr diffusivity does not depend on the crystal orientation, but shows ...
The evolution of imperfect crystal from a highly amorphous structure to an ordered crystalline struc...
We have carried out positron annihilation spectroscopy to characterize the spatial distribution and ...
In this dissertation, atomistic simulation and finite-element-modelling techniques were employed to ...
Strontium titanate SrTiO$_3$(100), (110), and (111) single crystals, undoped or donor doped with up ...
The influence of high temperature oxygen annealing on (100) oriented donor-doped SrTiO3 single cryst...
The behaviour of point defects in thin, epitaxial films of the oxide electrode SrRuO3 was probed by ...
Thermogravimetric measurements as a function of oxygen activity were performed in the temperature ra...
We report on O-18 tracer diffusion experiments and model calculations for the study of cation vacanc...
Perovskite oxides show various interesting properties providing several technical applications. In m...
The oxidation kinetics of a single crystal of SrTiOs were measured with a tensivolumetric system ove...
The use of the tensi-volumetric apparatus to study the non-stoichiometric behavior of strontium tita...
„Everything new is well-forgotten old“. This saying appears to fit to SrTiO3, as a representative me...
<div><p>The kinetics of annealing to transform stoichiometric SrTiO3 insulator into a vacancy-doped ...
We have carried out positron-annihilation spectroscopy to characterize the spatial distribution and ...
Using both computational and experimental analysis, we demonstrate a rich point-defect phase diagram...
The evolution of imperfect crystal from a highly amorphous structure to an ordered crystalline struc...
We have carried out positron annihilation spectroscopy to characterize the spatial distribution and ...
In this dissertation, atomistic simulation and finite-element-modelling techniques were employed to ...
Strontium titanate SrTiO$_3$(100), (110), and (111) single crystals, undoped or donor doped with up ...
The influence of high temperature oxygen annealing on (100) oriented donor-doped SrTiO3 single cryst...
The behaviour of point defects in thin, epitaxial films of the oxide electrode SrRuO3 was probed by ...
Thermogravimetric measurements as a function of oxygen activity were performed in the temperature ra...
We report on O-18 tracer diffusion experiments and model calculations for the study of cation vacanc...
Perovskite oxides show various interesting properties providing several technical applications. In m...
The oxidation kinetics of a single crystal of SrTiOs were measured with a tensivolumetric system ove...
The use of the tensi-volumetric apparatus to study the non-stoichiometric behavior of strontium tita...
„Everything new is well-forgotten old“. This saying appears to fit to SrTiO3, as a representative me...
<div><p>The kinetics of annealing to transform stoichiometric SrTiO3 insulator into a vacancy-doped ...
We have carried out positron-annihilation spectroscopy to characterize the spatial distribution and ...
Using both computational and experimental analysis, we demonstrate a rich point-defect phase diagram...
The evolution of imperfect crystal from a highly amorphous structure to an ordered crystalline struc...
We have carried out positron annihilation spectroscopy to characterize the spatial distribution and ...
In this dissertation, atomistic simulation and finite-element-modelling techniques were employed to ...