The ternary Al-Pd-Fe intermetallic phases formed in the range of 50 to 100 at.% Al were studied by scanning and transmission electron microscopy and powder X-ray diffractometry. The refined lattice parameters of the orthorhombic O-Al-13(Fe,Pd)(4) phase (Cmcb) are a 1.5499(4) b = 0.8102(5) and c = 2.3848(4) nm, of the cubic C (Pm (3) over bar) phase a = 0.7655(9) nm, of the cubic C-1(Im (3) over bar) phase a 1.5354(3) nm and of the cubic C-2 (Fm (3) over bar) phase a = 1.5510(1) nm. (C) 2003 Elsevier B.V. All fights reserved
Partial isothermal sections of the Al-Pd-Ru phase diagram at 1000, 1050 and 1100 degrees C are prese...
The constitution of the Al−Pd−Pt alloy system was studied above 35 at.% Al at 700, 780, 900 and 1100...
Using metallographic, diffraction and thermal analysis examinations the base centered orthorhombic A...
The Al-Pd-Fe alloy system exhibits a continuous range between the solid solution of b.c.c. Fe extend...
The isothermal 750degreesC section of Al-Pd-Fe was determined between 50 and 100 at.% Al. The range ...
The results of an investigation of the structures formed in the range of about Al73Pd27 to Al76Pd14F...
The Al-Pd-Cr alloy system was investigated in the compositional range above 50 at.% Al. The binary A...
Scanning and transmission electron microscopy have been used with electron-probe microanalysis, x-ra...
The Al-Pd-Co alloy system was studied in the range of 50 to 100 at.% Al. Isothermal sections at 1050...
The Al–Cr–Fe phase diagram was studied in the compositional range of 50–100 at% Al and partial isoth...
Data on the solidus surface of the Al-Cr-Fe system in the range 58-100 at.% Al and on the cast alloy...
Partial 1100, 1000, 900 and 790 degrees C isothermal sections of the Al-Pd-Ir phase diagram were exp...
Partial 1100, 1000, 900 and 790 degrees C isothermal sections of the Al-Pd-Rh phase diagram were stu...
Partial isothermal sections of the Al-Pd-Ru phase diagram at 790 and 900 degrees C are presented. Co...
The Al-rich part of the Fe-Al phase diagram between 50 and 80 at.% Al including the complex intermet...
Partial isothermal sections of the Al-Pd-Ru phase diagram at 1000, 1050 and 1100 degrees C are prese...
The constitution of the Al−Pd−Pt alloy system was studied above 35 at.% Al at 700, 780, 900 and 1100...
Using metallographic, diffraction and thermal analysis examinations the base centered orthorhombic A...
The Al-Pd-Fe alloy system exhibits a continuous range between the solid solution of b.c.c. Fe extend...
The isothermal 750degreesC section of Al-Pd-Fe was determined between 50 and 100 at.% Al. The range ...
The results of an investigation of the structures formed in the range of about Al73Pd27 to Al76Pd14F...
The Al-Pd-Cr alloy system was investigated in the compositional range above 50 at.% Al. The binary A...
Scanning and transmission electron microscopy have been used with electron-probe microanalysis, x-ra...
The Al-Pd-Co alloy system was studied in the range of 50 to 100 at.% Al. Isothermal sections at 1050...
The Al–Cr–Fe phase diagram was studied in the compositional range of 50–100 at% Al and partial isoth...
Data on the solidus surface of the Al-Cr-Fe system in the range 58-100 at.% Al and on the cast alloy...
Partial 1100, 1000, 900 and 790 degrees C isothermal sections of the Al-Pd-Ir phase diagram were exp...
Partial 1100, 1000, 900 and 790 degrees C isothermal sections of the Al-Pd-Rh phase diagram were stu...
Partial isothermal sections of the Al-Pd-Ru phase diagram at 790 and 900 degrees C are presented. Co...
The Al-rich part of the Fe-Al phase diagram between 50 and 80 at.% Al including the complex intermet...
Partial isothermal sections of the Al-Pd-Ru phase diagram at 1000, 1050 and 1100 degrees C are prese...
The constitution of the Al−Pd−Pt alloy system was studied above 35 at.% Al at 700, 780, 900 and 1100...
Using metallographic, diffraction and thermal analysis examinations the base centered orthorhombic A...