The chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for ITER divertor relevant hydrogen plasma flux densities 10(23) < Gamma < 10(25) m(-2) s(-1). The erosion was analyzed in situ by optical emission spectroscopy and post mortem by surface profilometry. The experiments indicate a threshold for the absolute carbon erosion rate as a function of plasma temperature T-e around 0.7 eV, a peak of the surface temperature around 550 degrees C, and no dependence on plasma flux density. The latter implies a flux dependence of the chemical erosion yield as Gamma(-1). The value of the chemical erosion yield at the surface temperature of maximum erosion and Gamma = 1 x 10(24) m(-2) s(-1) was 0.9% for T-e < 0.5 eV as dete...
Published data on chemical erosion of graphite in present fusion devices obtained by spectroscopy ar...
The CH A-X molecular band is measured upon seeding the hydrogen plasma in the linear plasma generato...
Methane (CH4) was injected into the high density (n(e) similar to 10(20) m(-3)), low temperature (T-...
The chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for ITER diver...
\u3cp\u3eThe chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for I...
Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to addr...
In a collaboration of eight experiments the dependence of the chemical erosion yield of carbon on th...
Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to addr...
Carbon materials could be used for divertor plates in the ITER fusion device. Numerous studies (expe...
The chemical erosion of carbon in interaction with a hydrogen plasma has been studied in detail in i...
\u3cp\u3eWe have studied the chemical erosion of different carbon composites in Pilot-PSI at ITER-re...
How long will the wall of a fusion reactor last: hours (i.e. much too short) or years? This question...
Published data on chemical erosion of graphite in present fusion devices obtained by spectroscopy ar...
The CH A-X molecular band is measured upon seeding the hydrogen plasma in the linear plasma generato...
Methane (CH4) was injected into the high density (n(e) similar to 10(20) m(-3)), low temperature (T-...
The chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for ITER diver...
\u3cp\u3eThe chemical erosion of carbon was investigated in the linear plasma device Pilot-PSI for I...
Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to addr...
In a collaboration of eight experiments the dependence of the chemical erosion yield of carbon on th...
Fine-grain graphite targets have been exposed to ITER divertor relevant plasmas in Pilot-PSI to addr...
Carbon materials could be used for divertor plates in the ITER fusion device. Numerous studies (expe...
The chemical erosion of carbon in interaction with a hydrogen plasma has been studied in detail in i...
\u3cp\u3eWe have studied the chemical erosion of different carbon composites in Pilot-PSI at ITER-re...
How long will the wall of a fusion reactor last: hours (i.e. much too short) or years? This question...
Published data on chemical erosion of graphite in present fusion devices obtained by spectroscopy ar...
The CH A-X molecular band is measured upon seeding the hydrogen plasma in the linear plasma generato...
Methane (CH4) was injected into the high density (n(e) similar to 10(20) m(-3)), low temperature (T-...