The liquidus and solidus surfaces of the Al-Mn-Pd alloy system as well as partial isothermal sections at 950, 900, 850, 800, 750, 680 and 650 degrees C in the vicinity of the T- and R-phases were determined. Non-variant reactions involving T, R and neighbouring phases are interpreted. The relationship between the chemical inhomogeneity of the as-solidified T-phase and the geometry of its solidus surface is discussed. The dependence of the T-phase lattice parameters on the Pd content was determined. The thermodynamic stability of the ternary R-phase, which is structurally closely related to T, is clarified. (c) 2007 Elsevier Ltd. All rights reserved
A detailed investigation of the Fourier space of several Al-Pd-Mn samples with composition Al-72.6 ...
The isothermal sections with lower Al content at 800 degrees C, 900 degrees C, 1200 degrees C, and 1...
Studies of phase formation in rapidly solidified Al-Mn alloys (composition range 18-22 at% Mn) show ...
The Al-Pd-Co alloy system was studied in the range of 50 to 100 at.% Al. Isothermal sections at 1050...
Following new findings by Y. Du et al. (Int. J. Mater. Res. 98 (2007) 855), the Al-Mn phase diagram ...
Ternary phases in the Al-rich region of the Al-Mn-Ni alloy system were studied at 950, 850 and 750 d...
The constitution of the Al−Pd−Pt alloy system was studied above 35 at.% Al at 700, 780, 900 and 1100...
The Al-Pd-Cr alloy system was investigated in the compositional range above 50 at.% Al. The binary A...
The liquidus and solidus surfaces of Al-Cr-Mn were determined between 60 and 100 at.% Al. Seven tern...
Phase equilibria in the Al-rich region of the Al-Mn-Ni alloy system were studied at 1000, 950, 850, ...
The constitution of the Al-Cr-Mn phase diagram in the compositional range of 60-100 at. 17, A I was ...
Partial 1100, 1000, 900 and 790 degrees C isothermal sections of the Al-Pd-Rh phase diagram were stu...
The Al-Pd-Fe alloy system exhibits a continuous range between the solid solution of b.c.c. Fe extend...
Scanning and transmission electron microscopy have been combined with x-ray diffraction to examine t...
The Alsingle bondMn alloy system contains complex intermetallics in its Al-rich part, and this was t...
A detailed investigation of the Fourier space of several Al-Pd-Mn samples with composition Al-72.6 ...
The isothermal sections with lower Al content at 800 degrees C, 900 degrees C, 1200 degrees C, and 1...
Studies of phase formation in rapidly solidified Al-Mn alloys (composition range 18-22 at% Mn) show ...
The Al-Pd-Co alloy system was studied in the range of 50 to 100 at.% Al. Isothermal sections at 1050...
Following new findings by Y. Du et al. (Int. J. Mater. Res. 98 (2007) 855), the Al-Mn phase diagram ...
Ternary phases in the Al-rich region of the Al-Mn-Ni alloy system were studied at 950, 850 and 750 d...
The constitution of the Al−Pd−Pt alloy system was studied above 35 at.% Al at 700, 780, 900 and 1100...
The Al-Pd-Cr alloy system was investigated in the compositional range above 50 at.% Al. The binary A...
The liquidus and solidus surfaces of Al-Cr-Mn were determined between 60 and 100 at.% Al. Seven tern...
Phase equilibria in the Al-rich region of the Al-Mn-Ni alloy system were studied at 1000, 950, 850, ...
The constitution of the Al-Cr-Mn phase diagram in the compositional range of 60-100 at. 17, A I was ...
Partial 1100, 1000, 900 and 790 degrees C isothermal sections of the Al-Pd-Rh phase diagram were stu...
The Al-Pd-Fe alloy system exhibits a continuous range between the solid solution of b.c.c. Fe extend...
Scanning and transmission electron microscopy have been combined with x-ray diffraction to examine t...
The Alsingle bondMn alloy system contains complex intermetallics in its Al-rich part, and this was t...
A detailed investigation of the Fourier space of several Al-Pd-Mn samples with composition Al-72.6 ...
The isothermal sections with lower Al content at 800 degrees C, 900 degrees C, 1200 degrees C, and 1...
Studies of phase formation in rapidly solidified Al-Mn alloys (composition range 18-22 at% Mn) show ...