In this study, liquid phase sintering of Ni-W alloys containing a low W solid volume fraction was conducted. A solid-plus-liquid (mushy) zone forms at the compact bottom. A liquid head above this zone demonstrates macrosegregation. With increasing sintering time, macrosegregation is reduced concurrent with a decrease in the volume fraction of W particles and mushy-zone sedimentation. © 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved
Gravity-induced phase separation during melting of Pb-Sn alloys results in a macroscopic concentrati...
The role of liquid phase and grain growth during the intermediate stage of sintering is investigated...
Densification and distortion of W-Ni-Fe tungsten heavy alloys during liquid phase sintering are mode...
When an alloy such as Ni-W is liquid phase sintered, heavy solid W particles sedimentate to the bott...
Macrosegregation during melting of alloys can arise if the densities of the alloy components differ....
The evolution of microstructure in liquid phase sintered (LPS) alloys as it occurs in a gravity envi...
Densification and subsequent distortion of tungsten heavy alloys is investigated through microstruct...
Densification and subsequent distortion of tungsten heavy alloys can be investigated through microst...
The initial stage of liquid phase sintering, involving liquid penetration, agglomerate separation, p...
In this.study, the effects of composition and sintering temperature on the microstructural character...
The kinetics of liquid-phase sintering in tungsten-nickel-copper alloys were examined in the tempera...
International audienceThe powders of a W-based alloy have been milled to improve the sintering and i...
An analysis of tungsten heavy alloys is performed with respect to their suitability as model systems...
The tool industry strongly demands more economical, high-performance, healthy, and ecological Co-fre...
In this paper we will investigate gravity induced skeletal settling during liquid phase sintering. I...
Gravity-induced phase separation during melting of Pb-Sn alloys results in a macroscopic concentrati...
The role of liquid phase and grain growth during the intermediate stage of sintering is investigated...
Densification and distortion of W-Ni-Fe tungsten heavy alloys during liquid phase sintering are mode...
When an alloy such as Ni-W is liquid phase sintered, heavy solid W particles sedimentate to the bott...
Macrosegregation during melting of alloys can arise if the densities of the alloy components differ....
The evolution of microstructure in liquid phase sintered (LPS) alloys as it occurs in a gravity envi...
Densification and subsequent distortion of tungsten heavy alloys is investigated through microstruct...
Densification and subsequent distortion of tungsten heavy alloys can be investigated through microst...
The initial stage of liquid phase sintering, involving liquid penetration, agglomerate separation, p...
In this.study, the effects of composition and sintering temperature on the microstructural character...
The kinetics of liquid-phase sintering in tungsten-nickel-copper alloys were examined in the tempera...
International audienceThe powders of a W-based alloy have been milled to improve the sintering and i...
An analysis of tungsten heavy alloys is performed with respect to their suitability as model systems...
The tool industry strongly demands more economical, high-performance, healthy, and ecological Co-fre...
In this paper we will investigate gravity induced skeletal settling during liquid phase sintering. I...
Gravity-induced phase separation during melting of Pb-Sn alloys results in a macroscopic concentrati...
The role of liquid phase and grain growth during the intermediate stage of sintering is investigated...
Densification and distortion of W-Ni-Fe tungsten heavy alloys during liquid phase sintering are mode...