Laser-induced fluorescence measurement of very slow neutral flows in a dusty plasma experiment

Laser-Induced Fluorescence (LIF) provides the temperature and flow velocity of a target species by direct measurement of its velocity distribution via Doppler shift. A LIF diagnostic has been developed at the Caltech water–ice dusty plasma experiment that uses an ultra-narrow tunable diode laser to pump the λ_(vac) = 696.735 nm argon neutral transition. A photomultiplier detects fluorescence emission at λ_(vac) = 772.633 nm. Signal to noise ratios in excess of 100 are achieved along with a high degree of reproducibility between measurements. A Labview program fully automates data collection throughout the three-dimensional plasma volume by controlling four stepper motors and recording measured data. The argon neutral temperature is measured to be slightly above room temperature. Challenges such as the lack of absolute calibration of diode lasers and wavelength drift due to slight changes in ambient room conditions are overcome to measure bulk neutral flow speeds on the order of 1–2 m/s with resolution on the order of 2/3 of a meter per second. High-speed video shows that introducing an argon flow to a cloud of ice grains causes the cloud of ice grains to move and change shape. Ice grain motion is analyzed and found to be in agreement with neutral LIF flow measurements. Surprisingly, when the flow ceases, the ice grain cloud reverts to its original location and shape