Study on the drift calibration method and device for the tin oxide pH electrode 

[[abstract]]Drift phenomenon has been known as the drawback of sensors and causes inaccuracy on the long-term measurement. In general, there are two methods to reduce the drift problem. One is to tune the parameters of the fabrication process to improve the properties of the front-ended device. Another is to compensate the drift phenomenon by adding extra drift compensation circuit or software in the back-ended readout circuit. In this study, a drift calibration method for the potentiometric sensor Was presented and the drift calibration method was performed by using the circuit. According to experimental results, the drift phenomenon of the SnO2 pH electrode was reduced by the drift calibration device.[[note]]SC