Impact of soft hydrothermal pre-treatments on the olive mill solid waste characteristics and its subsequent anaerobic digestion

4 Figuras.-- 5 TablasThe aim of this study was to investigate the effect of a soft hydrothermal pre-treatment (SHP) on olive mill solid waste (OMSW) and its subsequent anaerobic digestion (AD). OMSW was pre-treated in an autoclave at temperatures of 121 °C and 133 °C and excess pressures of 1.1 and 2.1 bars, respectively at heating times of 15, 20, and 30 min. The digestibility of pre-treated and untreated OMSW was determined in terms of methane potential through using biochemical methane potentials tests (BMP). Important solubilization of high-valuable compounds such as hydroxytyrosol and 3,4-dihydroxyphenylglycol was observed after pre-treatments. SHP showed a significant reduction in fiber length and width (p < 0.05). A higher polysaccharides solubilization was observed in treatment at 121 °C compared with that observed at 133 °C. SHP carried out at 121 °C, 1.1 bar (30 min) (pre-treatment A1), allowed obtaining the highest methane yield (380 ± 5 mL CH4/g VS), which was 12.3% higher than that obtained for untreated OMSW. Pearson correlation (PEC) and principal component analysis (PCA) were carried out. PEC showed a positive correlation with phenol vanillic acid and PCA grouped pre-treatment A1 with polysaccharides solubilization. The influence of the SHP conditions on the AD of OMSW was assessed through the monitoring of process performance and calculation of kinetic parameters by using the transference function model.This study was funded by the Project of Excellence RNM-1970 funded by the regional government of Andalucía, Junta de Andalucía, Consejería de Economía, Innovación, Ciencia y Empleo, Andalucía, Spain, and the Ramón y Cajal Program (RYC-2011-08783 contract) funded by the Spanish Ministry of Economy and Competitiveness for providing financial support to Dr. Rincón.Peer reviewe