MODELING ACOUSTIC PROPAGATION FROM CONICAL SHAPED AND STANDARD BLOCK EXPLOSIVE SOURCES IN COMPLEX OCEAN ENVIRONMENTS

Detection of underwater explosions by acoustic means, which has been widely researched, is simple, given the large peak pressures produced by these types of sources. By contrast, estimation of the explosive yield and type of explosive by such means has received less attention. This research compares the propagation of acoustic waves in a shallow water waveguide generated by underwater detonations producing broadband impulse signals. Typically, broadband waves are dispersive due to the waveguide in shallow water regions. Data was drawn from experiments conducted near Oahu, Hawai’i, using two explosive sources for different configurations: a conical shaped charge and a standard block. Both sources consisted of Composition C-4 explosive material and were detonated at comparable depths. This thesis focuses on differentiating the propagation of acoustic waves in multiple environments from these two kinds of sources. Simulations were used to explore different seabed properties, which varied by location, and how they impacted peak pressure variability across the Indo-Pacific region. By enhancing the understanding of acoustic propagation of explosive sources in complex environments, this research is helpful in cross domain operations. The developed models can also be applied defensively to determine the optimal placement and number of sensors required to monitor critical infrastructure on the seabed.http://archive.org/details/modelingacoustic1094564841Lieutenant, Taiwan NavyApproved for public release; distribution is unlimited