Plasma-oxidized polystyrene: Wetting properties and surface reconstruction

The surface of oxygen-plasma-treated polystyrene (PSox) was investigated using X-ray photoelectron spectroscopy (XPS), streaming potential measurements and a dynamic study of the wetting properties at different pH (Wilhelmy plate method). The PSox surface is functionalized with various oxygen-containing groups, including carboxyl functions, and must be viewed as covered by a poly-electrolyte which swells depending on pH. The wetting hysteresis, its evolution upon repeated cycles and the influence of pH are controlled by the dissolution of functionalized fragments and the retention of water upon emersion; the retained water may evaporate progressively and allow macromolecule compaction and/or reorientation. Modification of the PSox surface upon aging in dry atmosphere, humid atmosphere, and water was studied using XPS and dynamic wetting measurements. Aging in water provoked the dissolution of PSox macromolecular chains, as indicated by adsorption of released fragments on a check PS sample placed nearby. However, the concentration of functionalized molecules at the surface of water-aged PSox was still sufficient to allow swelling at pH 5.6 and 11.0. Hydrophobicity recovery was faster in humid air (R. H. 95%) compared to dry air (R. H. 5%), due to the plasticizing effect of water. Hydrophobicity recovery upon aging in air was reversed quickly by immersion at pH 5.6 or 11.0, due to deprotonation and swelling