This note summarises the MD3310 activity. The goal was to measure the complex tune shift as a function of intensity in the LHC at 6.5 TeV. The session took place in the night of 17 June to 18 June 2018 as part of the MD block 1. Bunches of various intensities were injected and once at top energy, they were excited with the transverse damper (ADT). From the excitation signal, the tune of each bunch can be computed. Two fills were planned, the first to be performed with low bunch intensities, the second with high bunch intensities. Unfortunately, due to a magnet trip, only the first one was successfully completed
The fast beam losses in the order of 1 ms are expected to be a potential major luminosity limitation...
This MD note summarizes the measurements performed to study persistent longitudinal oscillations aft...
The aim of the MD was to study the controlled longitudinal emittance blow-up applied during the ramp...
This report summarizes the results of the backup activity performed after cancellation of the MD1787...
This report summarises the results of MD3318 about impedance measurements of individual LHC secondar...
The tune of the Large Hadron Collider (LHC) mainly depends on the strength of the quadrupole magnets...
The LHC is now operating with a tune separation of ∼0.004 in collision. This puts tight constraints ...
The horizontal and vertical betatron tunes of the Large Hadron Collider (LHC) mainly depend on the s...
AbstractThe horizontal and vertical betatron tunes of the Large Hadron Collider (LHC) mainly depend ...
This report summarises the results of MD1875 about impedance measurements of single LHCsecondary co...
This note summarizes the collimation quench test MD with 208Pb82+ beams at 6.37Z TeV in which a quen...
This note reports on the first measurements of the beam waist displacements in the LHC using luminosi...
A series of tests were performed that led to a measurement of the tune shift along a 96 bunch batch ...
For the LHC lattice Version 5, 6D tracking studies have been performed at injection energy over a wi...
Amplitude detuning at end-of-squeeze is measured during this MD, with both flat-orbit and crossing-an...
The fast beam losses in the order of 1 ms are expected to be a potential major luminosity limitation...
This MD note summarizes the measurements performed to study persistent longitudinal oscillations aft...
The aim of the MD was to study the controlled longitudinal emittance blow-up applied during the ramp...
This report summarizes the results of the backup activity performed after cancellation of the MD1787...
This report summarises the results of MD3318 about impedance measurements of individual LHC secondar...
The tune of the Large Hadron Collider (LHC) mainly depends on the strength of the quadrupole magnets...
The LHC is now operating with a tune separation of ∼0.004 in collision. This puts tight constraints ...
The horizontal and vertical betatron tunes of the Large Hadron Collider (LHC) mainly depend on the s...
AbstractThe horizontal and vertical betatron tunes of the Large Hadron Collider (LHC) mainly depend ...
This report summarises the results of MD1875 about impedance measurements of single LHCsecondary co...
This note summarizes the collimation quench test MD with 208Pb82+ beams at 6.37Z TeV in which a quen...
This note reports on the first measurements of the beam waist displacements in the LHC using luminosi...
A series of tests were performed that led to a measurement of the tune shift along a 96 bunch batch ...
For the LHC lattice Version 5, 6D tracking studies have been performed at injection energy over a wi...
Amplitude detuning at end-of-squeeze is measured during this MD, with both flat-orbit and crossing-an...
The fast beam losses in the order of 1 ms are expected to be a potential major luminosity limitation...
This MD note summarizes the measurements performed to study persistent longitudinal oscillations aft...
The aim of the MD was to study the controlled longitudinal emittance blow-up applied during the ramp...