This work studied the percent depth doses of 60Co photon beams in the buildup region of a plastic phantom by LiF TLD measurements and by Monte Carlo calculations. An agreement within ± 1.5% was found between PDDs measured by TLD and calculated by the Monte Carlo method with the TLD in a plastic phantom. The dose in the plastic phantom was scored in voxels with thickness scaled by physical and electron density. PDDs calculated by electron density scaling showed a better match with PDD(MC, TLD) ; the difference is within ± 1.5% in the buildup region for square and rectangular field sizes
The purpose of this thesis is to measure the peak scatter factors (PSFs) for a 10X10 ...
The purpose of this study was to investigate the characteristics of electron contamination and Outpu...
In this study, some confusing points about electron film dosimetry using white polystyrene suggested...
93 p.Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 1984.Monte Carlo computer codes wer...
This thesis presents an investigation of depth doses of 9-18 MeV electron beams measured with custom...
To evaluate the dose values predicted by several calculation algorithms in two treatment planning sy...
International audienceThermoluminescent dosimeters (TLD) are widely applied in quality assurance of ...
The purpose of the investigation was to obtain accurate values for dose distributions in the buildup...
In radiation dosimetry protocols, plastic is allowed as a phantom material for the determination of ...
Absorbed dose sensitivity (SAD) of a dosimeter results from absorbed dose energy dependence (f) and ...
Nowadays, the use of tissue mimicking material (TMM) is widespread in both diagnostic and therapeuti...
SummaryAimThermoluminescent dosimeters (TLDs) have various applications in non-primary beam dosimetr...
To help medical physicist to evaluate dose values due to direct application of electron beams we hav...
This study assessed the validity of the conversion from percentage depth dose (PDD) to tissue maximu...
Slant-path buildup factors for photons between 1 keV and 10 MeV for nine radiation shielding materia...
The purpose of this thesis is to measure the peak scatter factors (PSFs) for a 10X10 ...
The purpose of this study was to investigate the characteristics of electron contamination and Outpu...
In this study, some confusing points about electron film dosimetry using white polystyrene suggested...
93 p.Thesis (Ph.D.)--University of Illinois at Urbana-Champaign, 1984.Monte Carlo computer codes wer...
This thesis presents an investigation of depth doses of 9-18 MeV electron beams measured with custom...
To evaluate the dose values predicted by several calculation algorithms in two treatment planning sy...
International audienceThermoluminescent dosimeters (TLD) are widely applied in quality assurance of ...
The purpose of the investigation was to obtain accurate values for dose distributions in the buildup...
In radiation dosimetry protocols, plastic is allowed as a phantom material for the determination of ...
Absorbed dose sensitivity (SAD) of a dosimeter results from absorbed dose energy dependence (f) and ...
Nowadays, the use of tissue mimicking material (TMM) is widespread in both diagnostic and therapeuti...
SummaryAimThermoluminescent dosimeters (TLDs) have various applications in non-primary beam dosimetr...
To help medical physicist to evaluate dose values due to direct application of electron beams we hav...
This study assessed the validity of the conversion from percentage depth dose (PDD) to tissue maximu...
Slant-path buildup factors for photons between 1 keV and 10 MeV for nine radiation shielding materia...
The purpose of this thesis is to measure the peak scatter factors (PSFs) for a 10X10 ...
The purpose of this study was to investigate the characteristics of electron contamination and Outpu...
In this study, some confusing points about electron film dosimetry using white polystyrene suggested...