Binding energy between a vacancy and a Zn atom in Al was investigated by measurement of as-quenched resistivity in Al-0.021at % Zn and pure-Al, with the estimation of vacancy loss during quenching. The contribution of clusters to resistivity in Al-0.021at % Zn waa also investigated. Their results are summarized as follows: (1) The results of isothermal and isochronal annealing indicate that clusters in Al-0.021at % Zn cnuld not be detected beyond the experimental errors. (2) The model applied to estimate the vacancy loss in pure-Al has enough validity. The quantitative estimation of clusters ana the improvement in experimental conditions are greatly desired, which enable the more detailed, analysis of the data
Precipitation hardening involves solutionising, quenching and annealing steps, the latter often at v...
As to Al-Zn alloy, the difference between the formation of G.P.zones and that of clusters was invest...
Zero-field muon spin relaxation experiments were carried out with Al-1.6%Mg2Si, Al-0.5%Mg, and Al-0....
Binding energy between a vacancy and a Zn atom in Al was investigated by measurement of as-quenched ...
The influence of 0.03 and 0.08 at. % Ag additions on the clustering of Zn atoms in an Al-4.4 at. % Z...
Al-Zn, Al-Ag and Al-Cu base ternary alloys were studied by measurement of electrical resistivity. An...
Isochronal and isothermal ageing experiments have been carried out to determine the influence of 0.0...
The changes of electrical resistivity of several alloys, that is, Al-10wt % Zn, Al-10wt % Zn-0.01wt ...
Al-4.4 a/oZn and Al-4.4 a/oZn with Ag, Ce, Dy, Li, Nb, Pt, Y, or Yb, alloys have been investigated b...
The clustering phenomenon was observed when dilute Al-Zn alloys were annealed at temperatures higher...
Binding energies between a vacancy and an atom of lead or gold were measured with the same method as...
Several Al-Zn alloys containing 0.1~4.0wt.%Zn and pure Al were studied by means of measurements of e...
The experimentally determined apparent vacancy formation energy values in dilute aluminium—silver al...
Several Al-Zn alloys containing 0.041-4.4 at % Zn were studied by means of measurements of electrica...
We give ab initio calculations for vacancies in Al. The calculations are based on the generalized-gr...
Precipitation hardening involves solutionising, quenching and annealing steps, the latter often at v...
As to Al-Zn alloy, the difference between the formation of G.P.zones and that of clusters was invest...
Zero-field muon spin relaxation experiments were carried out with Al-1.6%Mg2Si, Al-0.5%Mg, and Al-0....
Binding energy between a vacancy and a Zn atom in Al was investigated by measurement of as-quenched ...
The influence of 0.03 and 0.08 at. % Ag additions on the clustering of Zn atoms in an Al-4.4 at. % Z...
Al-Zn, Al-Ag and Al-Cu base ternary alloys were studied by measurement of electrical resistivity. An...
Isochronal and isothermal ageing experiments have been carried out to determine the influence of 0.0...
The changes of electrical resistivity of several alloys, that is, Al-10wt % Zn, Al-10wt % Zn-0.01wt ...
Al-4.4 a/oZn and Al-4.4 a/oZn with Ag, Ce, Dy, Li, Nb, Pt, Y, or Yb, alloys have been investigated b...
The clustering phenomenon was observed when dilute Al-Zn alloys were annealed at temperatures higher...
Binding energies between a vacancy and an atom of lead or gold were measured with the same method as...
Several Al-Zn alloys containing 0.1~4.0wt.%Zn and pure Al were studied by means of measurements of e...
The experimentally determined apparent vacancy formation energy values in dilute aluminium—silver al...
Several Al-Zn alloys containing 0.041-4.4 at % Zn were studied by means of measurements of electrica...
We give ab initio calculations for vacancies in Al. The calculations are based on the generalized-gr...
Precipitation hardening involves solutionising, quenching and annealing steps, the latter often at v...
As to Al-Zn alloy, the difference between the formation of G.P.zones and that of clusters was invest...
Zero-field muon spin relaxation experiments were carried out with Al-1.6%Mg2Si, Al-0.5%Mg, and Al-0....