BEHAVIOR OF REINFORCED CONCRETE BEAMS CONTAINING LIGHTWEIGHT AGGREGATE IN THE TENSILE ZONE

In reinforced concrete design, the concrete in the tensile zone is assumed to be ineffective and increase the dead load of the structural elements. In order to reduce the self-weight, this paper examines the structural behavior of reinforced concrete beams containing lightweight concrete in the tensile region and normal weight concrete in the rest of the beam. The lightweight concrete was made from waste polystyrene. Four reinforced concrete beams were prepared with different depth of lightweight concrete. The control beam B1 consists of normal concrete. In Beams B2, B3 and B4, the depth of lightweight concrete was 25%, 50% and 75% of the total depth of the beam measured from the bottom surface respectively. A four-point bending test was conducted on all beams. The beams were loaded in increments until failure. At each load increment, the central deflection was determined. Cracks initiation and the mode of failure were observed during the experiment. The failure load was found to decreases with the increase of depth of lightweight concrete. The presence of lightweight aggregate tends to cause brittle failure. In addition, the mode of failure for reinforced concrete beams containing lightweight concrete was a shear failure