JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Silicate (13-93) and borate (13-93B3) bioactive glass scaffolds were created by robotic deposition (robocasting) of organic solvent-based suspensions and evaluated in vitro for potential application in bone repair. Suspensions (inks) were developed, characterized, and deposited layer-by-layer to form three-dimensional scaffolds with a grid-like microstructure (porosity approximate to 50%; pore width 420 +/- 30 mu m). The mechanical response of the scaffolds was tested in compression, and the conversion of the glass to hydroxyapatite (HA)-like material in a simulated body fluid (SBF) was evaluated. As fabricated, the 13-93 scaffolds had a compressive strength 142 +/- 20 MPa, comparable to the strength of human cortical bone, while the strength of the 13-93B3 scaffolds (65 +/- 11 MPa), was far higher than that for trabecular bone. When immersed in SBF, the borate 13-93B3 scaffolds converted faster than the silicate 13-93 scaffolds to an HA-like material, but they also showed a sharper decrease in strength with immersion time. Based on their high compressive strength and bioactivity, the scaffolds fabricated in this work by robocasting could have potential application in the repair of load-bearing bone. (C) 2012 Elsevier Ltd. All rights reserved