Enhanced removal of antimony in dyeing wastewater by mixing Fe3O4 with manganese sand filter material

International audienceWastewaters from the printing and dyeing industries contain many contaminants in particular antimony (Sb) that end up in the environment. Both manganese sand filter and Fe3O4 have good removal effect on Sb, and are cheap and easy to obtain. We made a filter material by mechanically mixing the manganese sand filter material and ferro-ferric oxide (Fe 3 O 4). The Fe-Mn oxide filter material was analyzed by X-ray diffraction. We studied the filtration of real wastewater from a dyeing wastewa-ter resource recovery facility in Suzhou, China, containing Sb at high concentration of 410 μg/L, using dynamic tests in adsorption columns during 7 days. We tested the effects of filter material volume filling ratio, the empty bed contact time (EBCT), pH, and back washing on the removal of Sb. Results show that the addition of Fe3O4 enhanced the removal of Sb, reaching 85% of initial Sb. When the initial influent pH of the raw water is 3.0, the volume filling ratio of filter material is 60%, the EBCT is 20 min, and the developed dynamic Fe-Mn oxide filter has the best removal effect on Sb. Daily back washing of the filter keeps a Sb removal rate of about 80%