Capillary electrophoresis with end-capillary potentiometric detection using a copper electrode

Potentiometric end-capillary detection in capillary electrophoresis has the advantage of relatively easy miniaturisation without having to compromise the concentration sensitivity. Potentiometric end-capillary detection using a copper electrode is also attractive because of the sensitive detection of many inorganic and organic UV-transparent ions and the ability to work in both direct and indirect mode. In this work, detection of a number of common anions in a tartrate electrolyte at pH 3 was studied. The influence of the end-capillary detection geometry on the detection performance was investigated. An end-capillary detection cell allowing the separation capillary to be changed without the need to realign the detection electrode was constructed and fitted into a commercial CE apparatus. Under the optimal configuration, which was a 25 m diameter copper electrode aligned coaxially with a 25 m capillary and positioned at a distance of about 25 m from the capillary end, excellent peak shapes were achieved and comparison with simultaneous on-capillary photometric detection showed no additional peak broadening. Good sensitivity was obtained, resulting in concentration limits of detection (LODs) in the low M range and mass LODs in the low amol range. Examples of separations of inorganic and organic anions are presented and the analytical potential of the detection method is assessed