A comparison of iodinated trihalomethane formation from chlorine, chlorine dioxide and potassium permanganate oxidation processes

[[abstract]]This study compared the formation of iodinated trihalomethanes (I-THMs) from iodidecontaining raw waters oxidized by chlorine, chlorine dioxide (ClO2) and potassium permanganate (KMnO4) at different oxidant concentrations, reaction times, pHs, initial iodide concentrations and bromide to iodide mass ratios. Among the six investigated I-THMs, iodoform was the major species formed during the oxidation using chlorine, ClO2 and KMnO4. When oxidant concentration increased from 0.1 to 3.0 mg/L, the formation of ITHMs increased and then decreased for chlorine and ClO2, but kept increasing for KMnO4. As the reaction time went by, I-THM concentration increased to a plateau within 10 h (ClO2 within only 1 h, especially) for all the three oxidants. I-THM formation gradually increased from pH 3.0 to 9.0 and remained stable at pH values higher than 7.5 for chlorine; however, for ClO2 and KMnO4 the highest I-THM formation showed at pH 7.0 and 7.5, respectively. As initial iodide concentration increased from 20 to 800 mg/L, the total amount and species of ITHMs increased for the three oxidants. Iodide contributed to I-THM formation much more significantly than bromid