Structural and optical properties of Ti-doped ZnO thin films prepared by cathodic vacuum arc technique with different annealing process

[[abstract]]Highly transparent Ti-doped ZnO thin films were prepared on glass substrates at a deposition rate of approximately 33 nm/min using the cathodic vacuum arc technique with a Zn target power of 550 W and a Ti target power of 750 W, respectively. X-ray diffraction measurements have shown that the Ti-doped ZnO thin film with a vacuum post-annealing condition is c-axis oriented but an amorphous phase at the other post-annealing atmosphere and as-deposited condition. Transmittance measurements show that the best optical quality of the Ti-doped ZnO thin films occurred at a post-annealing atmosphere of N2/H2 mixed gases. Additionally, the optical transmittance of all films has been found more than 85% in a range of 500–700 nm. The lowest electrical resistivity was 3.48 × 10−3 Ω cm, obtained on as-deposited films. However, the post-annealing condition greatly increased the resistivity