A Reliability of study and analysis in wireless circuits

[[abstract]]目前的現有針對線路的可靠度分析的方式大多數是以計算線路 中所有的零件個數，然後先求出單一零件的可靠度然後乘上線路中此零件的數目。最後將整個線路中的所有零件之可靠度加起來得到此線路的可靠度。但是此種方式沒有考慮到該零件在線路中的位置及對於整個線路的影響有多大。所以在本文中還是遵循著先求得單一零件的方式，然後再去求得整體的可靠度。在本文的討論中求單一零件的方式除了使用網路上的計算工具外，另外也使用VB 撰寫了單一零件的可靠度及網路分析的計算。在本文中針對線路的分析不但考慮單一零件的可靠度，同時也配合整體線路的網路架構考慮零件在線路中的位置，這些在本文中也都會有實例來加以說明。[[abstract]]Present existing most ways to analyse to the reliability of the circuit are by calculating all number of parts in the circuit, then ask out the reliability of the single part then take advantage of going to the figure of this part in the circuit first. Add up the reliability of getting this circuit of the reliability of all parts in the whole circuit finally. It consider by this part positions of roads not on-line but this way and how heavy for influence of circuit not whole. So originally still in the article follow the way to try to get the single part first. Then go to try to get the reliability of the whole. Ask single part way besides using the computational tool on the network in the discussion of this text, use VB to write the calculation of the reliability and network analysis of the single part too in addition. Not only considers the reliability of the single part to the analysis of the circuit originally in the article, cooperate with the network structure of the whole circuit to consider the position in the on-line road of the part at the same time, these in have instance is it prove to come too in the article originally