The control of energy distribution or energy intensity inside a laser spot using a defocusing method enables the formation of high-quality microchannels of multiple cross-sections in polycarbonate. Moreover, a thermal mathematical model of the process was developed to aid understanding of the process and to allow channel topology prediction
This article describes the manufacturing and characterisation of plano-convex miniaturised lenses us...
© 2003 American Vacuum Society. This article may be downloaded for personal use only. Any other use ...
The microelectronics industry is moving toward smaller feature sizes. The main driving forces are to...
In this thesis, three different processes for the fabrication of microchannels in three different ba...
Micromachining on glass and polymers has been a widely attractive approach during the past few decad...
This thesis presents important advances in the laser processing of fused silica in order to create m...
Fabrication of microfluidic devices has always been a challenging endeavour due to its characteristi...
This paper deals with CO 2 laser machining of a suitable amorphous polymer (PMMA) as a flexible tech...
We demonstrate the capability of a laser micromachining workstation for cost-effective manufacturing...
This thesis describes a number of studies of microstructured optical resonators, designed with the ...
From Hindawi via Jisc Publications Router.History: received 2018-07-31, rev-recd 2018-11-15, accepte...
Direct-write laser processing has been demonstrated to be capable of both surface patterning of micr...
This thesis presents a study of lasing properties and optical amplification in semiconducting conjug...
Direct-write laser processing has been demonstrated to be capable of both surface patterning of micr...
Direct-write laser processing has been demonstrated to be capable of both surface patterning of micr...
This article describes the manufacturing and characterisation of plano-convex miniaturised lenses us...
© 2003 American Vacuum Society. This article may be downloaded for personal use only. Any other use ...
The microelectronics industry is moving toward smaller feature sizes. The main driving forces are to...
In this thesis, three different processes for the fabrication of microchannels in three different ba...
Micromachining on glass and polymers has been a widely attractive approach during the past few decad...
This thesis presents important advances in the laser processing of fused silica in order to create m...
Fabrication of microfluidic devices has always been a challenging endeavour due to its characteristi...
This paper deals with CO 2 laser machining of a suitable amorphous polymer (PMMA) as a flexible tech...
We demonstrate the capability of a laser micromachining workstation for cost-effective manufacturing...
This thesis describes a number of studies of microstructured optical resonators, designed with the ...
From Hindawi via Jisc Publications Router.History: received 2018-07-31, rev-recd 2018-11-15, accepte...
Direct-write laser processing has been demonstrated to be capable of both surface patterning of micr...
This thesis presents a study of lasing properties and optical amplification in semiconducting conjug...
Direct-write laser processing has been demonstrated to be capable of both surface patterning of micr...
Direct-write laser processing has been demonstrated to be capable of both surface patterning of micr...
This article describes the manufacturing and characterisation of plano-convex miniaturised lenses us...
© 2003 American Vacuum Society. This article may be downloaded for personal use only. Any other use ...
The microelectronics industry is moving toward smaller feature sizes. The main driving forces are to...
Add to ORKG