As-cast AZ80 magnesium alloy consists of α-Mg, eutectic product of α-Mg and γ-Mg17Al12, with the latter present in the form of partially and fully divorce eutectic. There occurs dissolution of harder γ-Mg17Al12 phase during homogenization treatment at 400 ° and 439 °C. The proportion of the α-Mg and γ-Mg17Al12 phase was varied by solutionizing the alloy for various lengths of time at these temperatures, in order to investigate the kinetics of phase transformation and to evaluate the effect of phase proportion, size and morphology on room temperature tensile properties. It was found that the yield strength decreases with the increase in solutionizing temperature from 400° to 439 °C and at t...
Thixomolding® processes of magnesium have been highlighted in research and applications in the last ...
AbstractThe tensile testing bars of the Mg–2.7Nd–0.6Zn–0.5Zr (wt.%) alloy were prepared by sand cast...
Title: Influence of Solid Solution Elements and Precipitate Formation on the Mechanical Behaviour of...
Microstructure evolution after solutionizing and ageing treatment of cast AZ80 Mg alloy were investi...
The microstructure and mechanical properties of AZ80 magnesium alloy after solid solution and aging ...
Microstructure evolution after solutionizing and ageing treatment of cast AZ80 Mg alloy were investi...
The objective of this study was to investigate the dependence of the room temperature tensile proper...
Magnesium alloys have been increasingly considered as an attractive material in the transportation i...
The Mg-8Zn-8Al-4RE (RE = mischmetal, mass%) magnesium alloy was prepared by using casting method. Th...
Magnesium is particularly challenging material, when formed from liquid phase because of high flamma...
Magnesium alloys have generated renewed interest as a light alloys; replacing some conventional stru...
The tensile testing bars of the Mg–2.7Nd–0.6Zn–0.5Zr (wt.%) alloy were prepared by sand casting. The...
The experimental activity was aimed at optimizing the T6 heat treatment conditions of the innovative...
This study investigated the effect of aging on the precipitation and kinetics of second phase Mg17Al...
The influence of Mg17Al12 phase morphology on the mechanical properties of AZ80 magnesium alloy subj...
Thixomolding® processes of magnesium have been highlighted in research and applications in the last ...
AbstractThe tensile testing bars of the Mg–2.7Nd–0.6Zn–0.5Zr (wt.%) alloy were prepared by sand cast...
Title: Influence of Solid Solution Elements and Precipitate Formation on the Mechanical Behaviour of...
Microstructure evolution after solutionizing and ageing treatment of cast AZ80 Mg alloy were investi...
The microstructure and mechanical properties of AZ80 magnesium alloy after solid solution and aging ...
Microstructure evolution after solutionizing and ageing treatment of cast AZ80 Mg alloy were investi...
The objective of this study was to investigate the dependence of the room temperature tensile proper...
Magnesium alloys have been increasingly considered as an attractive material in the transportation i...
The Mg-8Zn-8Al-4RE (RE = mischmetal, mass%) magnesium alloy was prepared by using casting method. Th...
Magnesium is particularly challenging material, when formed from liquid phase because of high flamma...
Magnesium alloys have generated renewed interest as a light alloys; replacing some conventional stru...
The tensile testing bars of the Mg–2.7Nd–0.6Zn–0.5Zr (wt.%) alloy were prepared by sand casting. The...
The experimental activity was aimed at optimizing the T6 heat treatment conditions of the innovative...
This study investigated the effect of aging on the precipitation and kinetics of second phase Mg17Al...
The influence of Mg17Al12 phase morphology on the mechanical properties of AZ80 magnesium alloy subj...
Thixomolding® processes of magnesium have been highlighted in research and applications in the last ...
AbstractThe tensile testing bars of the Mg–2.7Nd–0.6Zn–0.5Zr (wt.%) alloy were prepared by sand cast...
Title: Influence of Solid Solution Elements and Precipitate Formation on the Mechanical Behaviour of...