Novel Aerosol/Gas Inlet for Aircraft-Based Measurements

A novel inlet has been designed for selective sampling of gas and aerosol phases of volatile species from high-speed aircraft. A multistage flow system brings the flow nearly isokinetically towards the sampling port. Two small airfoil-shaped "blades" are placed close to the sample port to provide the flow conditions required for aerosol and gas sampling. Aerosols are sampled when these blades are positioned to operate the inlet as a counterflow virtual impactor (CVI). The design enables sampling of particles as small as 0.1 w m from a high-speed aircraft under stratospheric conditions, a substantial improvement over that possible with previous CVI designs. For gas sampling, one of the blades is moved by a stepper motor to occlude the inlet opening and gas is sampled perpendicular to the bulk flow. Boundary layer suction is used to prevent the sampled gas from coming in contact with the impactor walls. This is one of the first designs of an inlet that enables gas sampling free of wall contact. The inlet was flown on the NASA ER-2 aircraft during the SOLVE 2000 campaign to study aerosol/gas partitioning of nitric acid in the lower stratosphere. Data from the flight tests show that the inlet flow characteristics are broadly in agreement with computational fluid dynamics (CFD) simulations