The cryogenic system of the LHC will use Pt-100 sensors to measure temperatures between 40-300K and isolation devices will be used. The selected commercial components must be rad-tolerant since a total radiation dose of 5E12 n/cm2 &100 Gy is expected during ten years of the LHC lifetime. Neutron tests in this family of devices were performed and the results are shown in this paper
Cryogenic bypass diodes are part of the baseline powering layout for the circuits of the new Nb3Sn b...
%title\\ \\In the recent years, intensive work has been carried out on the development of custom ICs...
The high luminosity at LHC requires a high radiation resistance for the detectors, especially for th...
The cryogenic system of the LHC will use Pt-100 sensors to measure temperatures between 40-300 K and...
This paper concentrates on the selection of radiation tolerant isolation amplifiers, which are suita...
The field electronics for the LHC cryogenic system will be subjected to neutron and gamma radiation....
The electronic instrumentation of the Large Hadron Collider (LHC) cryogenic system is expected to re...
The LHC accelerator will use about 1600 main superconducting magnets operating below 2K. The magnets...
This paper presents the advancement of a program being carried out in view of selecting the cryogeni...
Commercial-off-the-shelf (COTS) capacitor-based isolation amplifiers were irradiated at the Portugue...
The control system electronic of the LHC cold mass will require the use of 12-bit parallel input dat...
Instrumentation amplifiers and voltage controlled current sources have been designed by using single...
Tests on instrumentation amplifiers exposed to neutron radiation have been done. The tested devices ...
There are more than 6000 electronic cards for the instrumentation of the LHC cryogenics, housed in c...
Two new types of electronic cards have been tested in CERN's CHARM irradiation facility. The cards a...
Cryogenic bypass diodes are part of the baseline powering layout for the circuits of the new Nb3Sn b...
%title\\ \\In the recent years, intensive work has been carried out on the development of custom ICs...
The high luminosity at LHC requires a high radiation resistance for the detectors, especially for th...
The cryogenic system of the LHC will use Pt-100 sensors to measure temperatures between 40-300 K and...
This paper concentrates on the selection of radiation tolerant isolation amplifiers, which are suita...
The field electronics for the LHC cryogenic system will be subjected to neutron and gamma radiation....
The electronic instrumentation of the Large Hadron Collider (LHC) cryogenic system is expected to re...
The LHC accelerator will use about 1600 main superconducting magnets operating below 2K. The magnets...
This paper presents the advancement of a program being carried out in view of selecting the cryogeni...
Commercial-off-the-shelf (COTS) capacitor-based isolation amplifiers were irradiated at the Portugue...
The control system electronic of the LHC cold mass will require the use of 12-bit parallel input dat...
Instrumentation amplifiers and voltage controlled current sources have been designed by using single...
Tests on instrumentation amplifiers exposed to neutron radiation have been done. The tested devices ...
There are more than 6000 electronic cards for the instrumentation of the LHC cryogenics, housed in c...
Two new types of electronic cards have been tested in CERN's CHARM irradiation facility. The cards a...
Cryogenic bypass diodes are part of the baseline powering layout for the circuits of the new Nb3Sn b...
%title\\ \\In the recent years, intensive work has been carried out on the development of custom ICs...
The high luminosity at LHC requires a high radiation resistance for the detectors, especially for th...