Ion implantation of Ti into Si at high doses has been performed. After laser annealing the maximum average of substitutional Ti atoms is about 10(18) cm(-3). Hall effect measurements show n-type samples with mobility values of about 400 cm(2)/V s at room temperature. These results clearly indicate that Ti solid solubility limit in Si has been exceeded by far without the formation of a titanium silicide layer. This is a promising result toward obtaining of an intermediate band into Si that allows the design of a new generation of high efficiency solar cell using Ti implanted Si wafers
Intermediate band formation on silicon layers for solar cell applications was achieved by titanium i...
We have fabricated titanium and vanadium supersaturated silicon layers on top of a silicon substrate...
In this study, we present a structural and optoelectronic characterization of high dose Ti implanted...
In this paper, we present a detailed characterization of high quality layers of Si implanted with Ti...
In this work we report the successful doping of Si with Ti at doses beyond the Mott limit for this e...
A detailed study on the resulting impurity profile in Si samples implanted with high doses of Ti and...
Ti supersaturated Si layers with two different thicknesses have been obtained on the top of a Si sub...
We have analyzed the structural and optical properties of Si implanted with very high Ti doses and s...
The following article appeared inJournal of Applied Physics 112.11 (2012): 113514 and may be found a...
Intermediate band (IB) materials have attracted considerable research interest since they can dramat...
The energy levels created in supersaturated n-type silicon substrates with titanium implantation in ...
Silicon samples were implanted with high Ti doses and subsequently processed with the pulsed-laser m...
Intermediate band silicon solar cells have been fabricated by Titanium ion implantation and laser an...
Fabrication of p-Si(111) layers with Ti levels well above the solid solubility limit was achieved vi...
In the framework of the third generation of photovoltaic devices, the intermediate band solar cell i...
Intermediate band formation on silicon layers for solar cell applications was achieved by titanium i...
We have fabricated titanium and vanadium supersaturated silicon layers on top of a silicon substrate...
In this study, we present a structural and optoelectronic characterization of high dose Ti implanted...
In this paper, we present a detailed characterization of high quality layers of Si implanted with Ti...
In this work we report the successful doping of Si with Ti at doses beyond the Mott limit for this e...
A detailed study on the resulting impurity profile in Si samples implanted with high doses of Ti and...
Ti supersaturated Si layers with two different thicknesses have been obtained on the top of a Si sub...
We have analyzed the structural and optical properties of Si implanted with very high Ti doses and s...
The following article appeared inJournal of Applied Physics 112.11 (2012): 113514 and may be found a...
Intermediate band (IB) materials have attracted considerable research interest since they can dramat...
The energy levels created in supersaturated n-type silicon substrates with titanium implantation in ...
Silicon samples were implanted with high Ti doses and subsequently processed with the pulsed-laser m...
Intermediate band silicon solar cells have been fabricated by Titanium ion implantation and laser an...
Fabrication of p-Si(111) layers with Ti levels well above the solid solubility limit was achieved vi...
In the framework of the third generation of photovoltaic devices, the intermediate band solar cell i...
Intermediate band formation on silicon layers for solar cell applications was achieved by titanium i...
We have fabricated titanium and vanadium supersaturated silicon layers on top of a silicon substrate...
In this study, we present a structural and optoelectronic characterization of high dose Ti implanted...