The influence of fluid-structure interaction on cloud cavitation about a flexible hydrofoil. Part 2

The influence of fluid-structure interaction on cloud cavitation about a hydrofoil is investigated by comparing results from a relatively stiff reference hydrofoil, presented in Part 1, with those obtained on a geometrically identical flexible hydrofoil. Measurements were conducted with a chord-based Reynolds number Re = 0.8 x 106 for cavitation numbers, σ, ranging from 0.2 to 1.2 while the hydrofoil was mounted at an incidence, α, of 6° to the oncoming flow. Tip deformations and cavitation behaviour were recorded with synchronised force measurements utilising two high-speed cameras. The flexible composite hydrofoil was manufactured as a carbon/glass-epoxy hybrid structure with a lay-up sequence selected principally to consider spanwise bending deformations with no material-induced bend-twist coupling. Hydrodynamic bend-twist coupling is seen to result in nose-up twist deformations causing frequency modulation from the increase in cavity length. The lock-in phenomenon driven by re-entrant jet shedding observed on the stiff hydrofoil is also evident on the flexible hydrofoil at 0.7 ≤ σ ≤ 0.75, but occurs between different modes. Flexibility is observed to accelerate cavitation regime transition with reducing σ. This is seen with the rapid growth and influence the shockwave instability has on the forces, deflections and cavitation behaviour on the flexible hydrofoil, suggesting structural behaviour plays a significant role in modifying cavity physics. The reduced stiffness causes secondary lock-in of the flexible hydrofoil's one-quarter sub-harmonic