This research is devoted to study phosphorus removal from Si-Al alloys by vacuum refining of the ternary system of dilute solutions of P in Si-20 wt%Al. The experiments were carried out in an induction furnace and after the refining process, the melt was characterized by ICP-MS technique to trace the concentration change of the volatile elements. The experimental results show that P removal from Si-Al-P melts takes place faster compared to Si-P melts and Al evaporates during the vacuum refining as well. The empirical kinetics of P and Al evaporation is discussed and the apparent activation energy for P and Al evaporation from Si-Al melts is obtained as and respectively. Results show that the composition of the melt changes continuously dur...
Phosphorus (P) is a critical impurity in metallurgical-grade Si that needed to be removed for solar-...
The rate of evaporation of sulphur from the melt was measured by the method similar to Langmuir\u27s...
The vacuum melting of Fe-Mn, Fe-Cu, Fe-Sn, Fe-Cr, Fe-S, and Fe-Si-S alloys was carried out at 1600℃ ...
This research is devoted to study phosphorus removal from Si-Al alloys by vacuum refining of the ter...
ABSTRACT: Since silicon is still the dominant material in photovoltaic devices and the market of PV ...
This work aims to investigate the phosphorus removal by vacuum from metallurgical grade silicon (MGS...
Treatment of liquid aluminum alloys in low vacuum conditions is often applied for parts production i...
Silicon refining for solar applications is intensively on demand, and removal of phosphorus from Si ...
Vacuum induction refining is a process that can be applied to remove phosphorus from molten si...
( Engelsk ) The evaporation of P from liquid Si under vacuum and reduced pressures of H2, He, and Ar...
In the production of solar grade silicon (SoG-Si), Phosphorus (P) removal from Si is a challenge as ...
Induction vacuum refining testwork has been carried out for the removal of phosphorus from silicon m...
In this paper, the results of the study on aluminium evaporation from the Al-Zn alloys (4.2% weight)...
In this paper the removal of impurities from metallurgical grade silicon by melting in a vacuum indu...
In the present paper, results of the study on changes in basic Ti-6Al-4V alloy component contents du...
Phosphorus (P) is a critical impurity in metallurgical-grade Si that needed to be removed for solar-...
The rate of evaporation of sulphur from the melt was measured by the method similar to Langmuir\u27s...
The vacuum melting of Fe-Mn, Fe-Cu, Fe-Sn, Fe-Cr, Fe-S, and Fe-Si-S alloys was carried out at 1600℃ ...
This research is devoted to study phosphorus removal from Si-Al alloys by vacuum refining of the ter...
ABSTRACT: Since silicon is still the dominant material in photovoltaic devices and the market of PV ...
This work aims to investigate the phosphorus removal by vacuum from metallurgical grade silicon (MGS...
Treatment of liquid aluminum alloys in low vacuum conditions is often applied for parts production i...
Silicon refining for solar applications is intensively on demand, and removal of phosphorus from Si ...
Vacuum induction refining is a process that can be applied to remove phosphorus from molten si...
( Engelsk ) The evaporation of P from liquid Si under vacuum and reduced pressures of H2, He, and Ar...
In the production of solar grade silicon (SoG-Si), Phosphorus (P) removal from Si is a challenge as ...
Induction vacuum refining testwork has been carried out for the removal of phosphorus from silicon m...
In this paper, the results of the study on aluminium evaporation from the Al-Zn alloys (4.2% weight)...
In this paper the removal of impurities from metallurgical grade silicon by melting in a vacuum indu...
In the present paper, results of the study on changes in basic Ti-6Al-4V alloy component contents du...
Phosphorus (P) is a critical impurity in metallurgical-grade Si that needed to be removed for solar-...
The rate of evaporation of sulphur from the melt was measured by the method similar to Langmuir\u27s...
The vacuum melting of Fe-Mn, Fe-Cu, Fe-Sn, Fe-Cr, Fe-S, and Fe-Si-S alloys was carried out at 1600℃ ...