Folding a ridge-spring

© 2019 A ridge-spring is a thin-walled bent strip with flat side panels. It may be folded elastically along its length, to create a localised hinge region of mostly uniform cylindrical curvature and bending moment, which do not vary with the fold angle of hinge. A simple analysis shows a common grouping in closed-form expressions; α4/3 · (b/t)1/3, where α is the pitch angle of the ridge line, b is the strip width and t its thickness. More accurate calculations of the hinge curvature and moment confirm the robustness of simpler expressions, which are compared to data obtained from finite element simulations. It is shown that, for many initial geometries, theoretical predictions of curvature and moment are typically within 10% of the computational results—which project the same dimensional performance. We also compare a ridge-spring to a more familiar tape-spring of equal cross-sectional proportions. For moderate pitch angles and relatively small thicknesses, it is shown that a ridge-spring has a higher folded hinge curvature and bending moment, comparatively, which may prove attractive for certain applications