Experimental measurement of wrinkle formation during draping of non-crimp fabric

A rig and image analysis methodology is described to characterise wrinkle formation during draping of non-crimp fabrics. The circular fabric blank is draped over a male hemispherical mould, partly constrained by a circular clamping ring around the periphery of the blank. The three-dimensional shape of the fabric is derived from a shape-from-focus analysis of a stack of photographs of the deformed blank. Wrinkles are identified from the deviation of the shape from a smoothed shape. Wrinkle formation is strongly dependent on the fabric architecture and increases progressively with increased punch displacement. Triaxial fabrics have the highest wrinkle amplitude, unidirectional and 0/90°biaxial fabrics the lowest amplitude. The clamping force reduces the wrinkling for some fabrics but, for the maximum force applied, is not effective at eliminating wrinkling