International audienceInconel 718 (IN718) superalloy samples fabricated by selective laser melting (SLM) were submitted to different heating cycles and their microstructural characteristics were investigated. The selected heating rates, ranging from 10 °C/min to 400 °C/s, represent different regions in the heat-affected zone (HAZ) of welded additively manufactured specimens. A combination of differential thermal analysis (DTA), high-resolution dilatometry, as well as laser confocal and electron microscopy were used to study the precipitation and dissolution of the secondary phases and microstructural features. For this purpose, the microstructure of the additively manufactured specimen was investigated from the bottom, in contact with the s...
Post-heat treatment of additively manufactured (AM) Inconel 718 components is essential for optimizi...
International audienceThe effect of SLM parameters on porosity, microstructure and mechanical proper...
Selective Laser Melting (SLM) was used to develop a manufacturing route for high temperature aero-en...
In this study, Inconel 718 superalloy was fabricated by selective laser melting (SLM) and solution ...
In this study, Inconel 718 superalloy was fabricated by selective laser melting (SLM) and solution ...
Selective Laser Melting (SLM) is a popular additive manufacturing process which enables the efficien...
The microstructural and mechanical properties of Inconel 718 were determined on the specimens manufa...
There is increasing interest in using selective laser melting (SLM) to produce flight hardware in th...
In this study, the densification behavior and microstructural development of Inconel 718 parts fabri...
Microstructure, hardness, precipitates and phase transformation on the X-Y surface of Inconel 718 Ni...
Additive manufacturing (AM) of nickel-based superalloys is of high interest for application in compl...
Inconel 718 is one of the main superalloys that are used in hot structures of jet engines today, bec...
Inconel 718 is one of the main superalloys that are used in hot structures of jet engines today, bec...
Additively manufacturing high performance metals by laser processing represents an exciting opportun...
Inconel 718 is one of the main superalloys that are used in hot structures of jet engines today, bec...
Post-heat treatment of additively manufactured (AM) Inconel 718 components is essential for optimizi...
International audienceThe effect of SLM parameters on porosity, microstructure and mechanical proper...
Selective Laser Melting (SLM) was used to develop a manufacturing route for high temperature aero-en...
In this study, Inconel 718 superalloy was fabricated by selective laser melting (SLM) and solution ...
In this study, Inconel 718 superalloy was fabricated by selective laser melting (SLM) and solution ...
Selective Laser Melting (SLM) is a popular additive manufacturing process which enables the efficien...
The microstructural and mechanical properties of Inconel 718 were determined on the specimens manufa...
There is increasing interest in using selective laser melting (SLM) to produce flight hardware in th...
In this study, the densification behavior and microstructural development of Inconel 718 parts fabri...
Microstructure, hardness, precipitates and phase transformation on the X-Y surface of Inconel 718 Ni...
Additive manufacturing (AM) of nickel-based superalloys is of high interest for application in compl...
Inconel 718 is one of the main superalloys that are used in hot structures of jet engines today, bec...
Inconel 718 is one of the main superalloys that are used in hot structures of jet engines today, bec...
Additively manufacturing high performance metals by laser processing represents an exciting opportun...
Inconel 718 is one of the main superalloys that are used in hot structures of jet engines today, bec...
Post-heat treatment of additively manufactured (AM) Inconel 718 components is essential for optimizi...
International audienceThe effect of SLM parameters on porosity, microstructure and mechanical proper...
Selective Laser Melting (SLM) was used to develop a manufacturing route for high temperature aero-en...