There is a need to better understand the influence of shear flow on the crystallization of a molten oil phase in an oil/water emulsion due to its high relevance for industrial processes. The present study focuses on the influence of laminar shear flow on the crystallization kinetics of polydisperse n ‐hexadecane‐in‐water emulsions. The investigation was carried out by rheo‐nuclear magnetic resonance (NMR) spectroscopy in a Taylor‐Couette geometry. An accelerating impact of the shear rate on the overall crystallization kinetics was verified. This effect stems from an increase of the collision frequency of already crystallized droplets with not yet crystallized droplets. Nevertheless, the collision efficiency decreased with higher shear rate
The powerful technique of microfluidics is applied for the first time to investigate the crystalliza...
This thesis describes work done to investigate the influence of controlled fluid shear on the primar...
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Chemical Engineering, February,...
Increasing the efficiency of disperse phase crystallization is of great interest for melt emulsion p...
Emulsions with crystalline dispersed phase are widely used formulations in life sciences. Unfortunat...
It is well known that shear has an effect on fat crystallization. Whereas rheo-NMR has been used to ...
The isothermal crystallization of three isotactic polypropylene (iPP) types, with different molar ma...
peer reviewedWe present a molecular dynamics simulation study of crystal nucleation from undercooled...
Abstract Flow-induced crystallisation in the course of melt spinning changes properties of as-spun f...
Crystallisation is an important unit operation used in the production of Active Pharmaceutical Ingre...
Flow-induced crystallization (FIC) is the main factor determining the properties of melt-processed s...
In common polymer processing operations such as injection molding, film blowing, and fiber spinning,...
Rheological set‐ups with in situ analytical sensors, combine information on the flow and deformation...
Molecular aspects of polymer melt rheology play an extremely strong role in governing the processing...
Thesis (DTech (Chemical Engineering))--Cape Peninsula University of Technology, 2005.The subject of ...
The powerful technique of microfluidics is applied for the first time to investigate the crystalliza...
This thesis describes work done to investigate the influence of controlled fluid shear on the primar...
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Chemical Engineering, February,...
Increasing the efficiency of disperse phase crystallization is of great interest for melt emulsion p...
Emulsions with crystalline dispersed phase are widely used formulations in life sciences. Unfortunat...
It is well known that shear has an effect on fat crystallization. Whereas rheo-NMR has been used to ...
The isothermal crystallization of three isotactic polypropylene (iPP) types, with different molar ma...
peer reviewedWe present a molecular dynamics simulation study of crystal nucleation from undercooled...
Abstract Flow-induced crystallisation in the course of melt spinning changes properties of as-spun f...
Crystallisation is an important unit operation used in the production of Active Pharmaceutical Ingre...
Flow-induced crystallization (FIC) is the main factor determining the properties of melt-processed s...
In common polymer processing operations such as injection molding, film blowing, and fiber spinning,...
Rheological set‐ups with in situ analytical sensors, combine information on the flow and deformation...
Molecular aspects of polymer melt rheology play an extremely strong role in governing the processing...
Thesis (DTech (Chemical Engineering))--Cape Peninsula University of Technology, 2005.The subject of ...
The powerful technique of microfluidics is applied for the first time to investigate the crystalliza...
This thesis describes work done to investigate the influence of controlled fluid shear on the primar...
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Chemical Engineering, February,...