Shaping zones of quiet in a large enclosure generated by an active noise control system

[EN] Performance of an Active Noise Control (ANC) system strongly depends on sensors and actuators spatial arrangement. It determines both achieved Noise Reduction (NR) levels and spatial distribution of obtained zones of quiet, making it an essential problem. However, if the acoustic field in the enclosure can be appropriately modelled, then optimization algorithms can be employed to find efficient configuration of the ANC system, enhancing its performance according to a formulated cost function and constraints. This paper proposes a complete method for enhancing NR levels and shaping zones of quiet generated with an ANC system by optimization of sensors and actuators arrangement. A Memetic Algorithm (MA) is utilized. The MA itself and its proposed operators are described. The optimization problem formulation is derived and discussed. As a control algorithm, Distributed Multiple Error Filtered-x Least Mean Square (DMEFxLMS) is used. Extensive simulation results are presented for an exemplary real enclosure. The model of the acoustic environment has been obtained by real-world experiments, resulting in identification of 36864 acoustic responses in total. Practically feasible cost function and constraints are evaluated. Advantages and limits of the method are pointed out and discussed.The research reported in this paper has been supported by the National Science Centre, Poland, decision no. DEC-2017/25/B/ST7/02236, and by EU together with Spanish Government under Grant TEC2015-67387-C4-1-R b(MINECO/FEDER).Wrona, S.; Diego Antón, MD.; Pawelczyk, M. (2018). Shaping zones of quiet in a large enclosure generated by an active noise control system. Control Engineering Practice. 80:1-16. https://doi.org/10.1016/j.conengprac.2018.08.0041168