Add to ORKGCorrosion fatigue crack growth rate of Soviet reactor pressure vessel steel 15X2M∅A and its cladding were studied in simulated PWR-conditions. The crack growth rate was highest in the cladding and lowest near the fusion line. No delamination or crack branching along the fusion line was found. In all cases, the ASME Code Section IX reference curves were conservative for the materials studied
Section 111 of the ASME Boiler and Pressure Vessel Code specifies fatigue design curves for structur...
This report summarizes work performed by Argonne National Laboratory on fatigue and environmentally ...
This paper describes the results of fatigue studies on carbon steel piping materials and components ...
Corrosion fatigue crack growth rate of Soviet reactor pressure vessel steel 15X2M∅A and its cladding...
Corrosion fatigue crack growth studies were conducted on eccentrically-loaded single edge notch tens...
An experiment is described which was performed at the VAK Kahl to investigate the crack growth behav...
SIGLELD:9091.9F(AERE-R--10421) / BLDSC - British Library Document Supply CentreGBUnited Kingdo
This paper presents the results of corrosion fatigue crack growth behaviour of a Ni-Cr-Mn steel comm...
Fatigue crack growth tests were performed on four point bend specimens with crack like defects inten...
Section III of the ASME Boiler and Pressure Vessel Code specifies fatigue design curves for structur...
Fatigue and environmentally assisted cracking of piping, pressure vessel cladding, and core componen...
The fatigue design curves for structural materials specified in Section III of the ASME Boiler and P...
In the wide environment sensitive cracking research area of the nuclear power plant components and m...
Crack growth data were obtained on fracture-mechanics specimens of Alloys 600 and 690 to investigate...
The fatigue crack growth behavior of Type 347 (S347) and Type 347N (S347N) stainless steel was evalu...
Section 111 of the ASME Boiler and Pressure Vessel Code specifies fatigue design curves for structur...
This report summarizes work performed by Argonne National Laboratory on fatigue and environmentally ...
This paper describes the results of fatigue studies on carbon steel piping materials and components ...
Corrosion fatigue crack growth rate of Soviet reactor pressure vessel steel 15X2M∅A and its cladding...
Corrosion fatigue crack growth studies were conducted on eccentrically-loaded single edge notch tens...
An experiment is described which was performed at the VAK Kahl to investigate the crack growth behav...
SIGLELD:9091.9F(AERE-R--10421) / BLDSC - British Library Document Supply CentreGBUnited Kingdo
This paper presents the results of corrosion fatigue crack growth behaviour of a Ni-Cr-Mn steel comm...
Fatigue crack growth tests were performed on four point bend specimens with crack like defects inten...
Section III of the ASME Boiler and Pressure Vessel Code specifies fatigue design curves for structur...
Fatigue and environmentally assisted cracking of piping, pressure vessel cladding, and core componen...
The fatigue design curves for structural materials specified in Section III of the ASME Boiler and P...
In the wide environment sensitive cracking research area of the nuclear power plant components and m...
Crack growth data were obtained on fracture-mechanics specimens of Alloys 600 and 690 to investigate...
The fatigue crack growth behavior of Type 347 (S347) and Type 347N (S347N) stainless steel was evalu...
Section 111 of the ASME Boiler and Pressure Vessel Code specifies fatigue design curves for structur...
This report summarizes work performed by Argonne National Laboratory on fatigue and environmentally ...
This paper describes the results of fatigue studies on carbon steel piping materials and components ...