Modelling and experimental testing of thick CFRP composites subjected to low velocity impacts

The present paper investigates a modelling approach of experimentally tested thick panels made of Carbon Fibre Reinforced Polymers (CFRP). The coupons were made of 24 unidirectional (UD) laminae with a layup [45/0/-45/90]3s. The specimens were subjected to low velocity impact using a drop tower system. Several sensors, including a load cell and strain gauge, were utilized both for analysing the behaviour of the material against the impact and for performing a validation of the numerical models. Three energy levels were adopted: 8J, 10J and 12J. Numerical models were implemented into the finite element (FE) software LS-DYNA. A linear - elastic constitutive law with an instantaneous failure material was selected for mimicking the intralaminar behaviour of the carbon fibre composite. Enhanced Chang - Chang was adopted as the onset-of-failure criterion. This criterion is able to capture damage in different directions and permits the consideration (or not) of the shear behaviour in the failure equations. The capability of the model to capture the correct interface failure process was particularly emphasized and therefore cohesive elements with a bilinear traction - separation law were chosen for the reproduction of delamination. Finally, the experimental - numerical results were compared using first and foremost the overall delamination area and the curves force - time, force - displacement and absorbed energy - time as well as the strain measures obtained by the sensors