Add to ORKGThe mechanism of the nucleation of Z-phase (CrVN) particles in a martensitic 10Kh9K3V2MFBR steel (9 wt % Cr) during creep at a temperature of 650°C is studied. The nucleation mechanism of Z-phase particles at a creep temperature of 650°C is found to be restructuring of the crystal lattice of V(C,N) carbonitrides due to the diffusion of chromium atom
In order to increase the corrosion resistance and simultaneously maintain the creep resistance of 9–...
The nucleation of the Laves phase particles in a Re-containing 10% wt. Cr-3% Co-3% W steel with a lo...
Compositionally complex Z-phase strengthened 12% Chromium steels are considered as potentially viabl...
The Z-phase (CrVN) precipitation in a 9% Cr-3% Co martensitic steel during creep at 923 K and 948 K ...
The size and distribution of Cr(V,Nb)N (Z-phase) particles in a 9Cr-3Co-2W-0.6Mo-0.1Ni-0.2V-0.06Nb-0...
The influence of the temperature, applied stress, degree of creep deformation, and aging time on the...
yesProspects of commercial use of new-generation martensitic thermomechanical steels created on the ...
Precipitation of Z phase contributes significantly to degradation of creep properties of 12CrMoVNb s...
In this study, the long term creep strength behavior of commercial heat resistant martensitic/ferrit...
Die vorliegende Arbeit legt ihren Schwerpunkt auf die Keimbildung Mo-reicher Laves Phase im Zuge von...
This paper reports on the formation of an Mo-rich Laves phase during high-temperature exposure and c...
The effect of tempering temperature and creep exposure on the microstructure of a modified 9Cr steel...
The kinetics of the growth of M₂₃C₆ carbide particles in 9% Cr steel of the martensitic class with a...
This thesis reports on quantitative investigations of microstructural changes, mainly precipitation ...
A low-nitrogen 10% Cr martensitic steel containing 3% Co and 0.008% B was shown to exhibit an extrem...
In order to increase the corrosion resistance and simultaneously maintain the creep resistance of 9–...
The nucleation of the Laves phase particles in a Re-containing 10% wt. Cr-3% Co-3% W steel with a lo...
Compositionally complex Z-phase strengthened 12% Chromium steels are considered as potentially viabl...
The Z-phase (CrVN) precipitation in a 9% Cr-3% Co martensitic steel during creep at 923 K and 948 K ...
The size and distribution of Cr(V,Nb)N (Z-phase) particles in a 9Cr-3Co-2W-0.6Mo-0.1Ni-0.2V-0.06Nb-0...
The influence of the temperature, applied stress, degree of creep deformation, and aging time on the...
yesProspects of commercial use of new-generation martensitic thermomechanical steels created on the ...
Precipitation of Z phase contributes significantly to degradation of creep properties of 12CrMoVNb s...
In this study, the long term creep strength behavior of commercial heat resistant martensitic/ferrit...
Die vorliegende Arbeit legt ihren Schwerpunkt auf die Keimbildung Mo-reicher Laves Phase im Zuge von...
This paper reports on the formation of an Mo-rich Laves phase during high-temperature exposure and c...
The effect of tempering temperature and creep exposure on the microstructure of a modified 9Cr steel...
The kinetics of the growth of M₂₃C₆ carbide particles in 9% Cr steel of the martensitic class with a...
This thesis reports on quantitative investigations of microstructural changes, mainly precipitation ...
A low-nitrogen 10% Cr martensitic steel containing 3% Co and 0.008% B was shown to exhibit an extrem...
In order to increase the corrosion resistance and simultaneously maintain the creep resistance of 9–...
The nucleation of the Laves phase particles in a Re-containing 10% wt. Cr-3% Co-3% W steel with a lo...
Compositionally complex Z-phase strengthened 12% Chromium steels are considered as potentially viabl...