Add to ORKGCeramic samples of ternary 0.5(Y0.1Zr0.9O2) - 0.5(0.6SrTiO3 - 0.4BiScO3) system consisting of individual Y0.1Zr0.9O2 and 0.6SrTiO3 - 0.4BiScO3 subsystems were synthesized via solid-state processing techniques. By XRD analysis, a coexistence of tetragonal P42/nmc phase related to the Y0.1Zr0.9O2 subsystem, and cubic Pm3̅m and tetragonal P4mm phases associated with the 0.6SrTiO3 - 0.4BiScO3 subsystem was foun
La0.4Ba0.6Ti0.6RE0.4O3 (where RE =Y, Yb) powders were synthesised by the mixed oxide route. Accordin...
The Curie temperature and the ideal thermal hysteresis of Pb1-y/2(Zr1-xTix)1-yNbyO3 (0.03≤x≤0.04, 0....
The purpose of this investigation was to conduct a crystallographic study of the PbZrO₃-PbTiO₃-BiFeO...
The ceramic system Y2O3-ZrO2-SrTiO3-BiScO3 was synthesized by the reaction method in the solid phase...
ABSTRACTThis article investigates the sintering temperature effect on microstructure and dielectric ...
yesFor the first time, ceramic solid solutions of (1-x)SrTi0₃-xBiSc0₃ system with x=0,0.05,0.1,0.2,0...
This paper presents the results of obtaining and investigations of Pb1–xBax(Zr1–yTiy)1–zSnzO3 (PBZTS...
Since ceramics in the PbZrO3–PbTiO3 binary system display excellent piezoelectric properties and tho...
Ceramic samples of the (1–x)SrTiO3–(x)BiScO3 system with x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5 ha...
Designing new materials with unique properties requires scientifically substantiated approaches to p...
High permittivity barium titanate zirconate (BTZ) is often used for dielectrics in commercial multil...
Designing new materials with unique properties requires scientifically substantiated approaches to p...
Piezoelectric ceramics are used in a wide range of technologies due to their ability to couple mecha...
(1 − x)BaTiO3–xBiGdO3 ceramics were prepared by the solid state reaction method. X-ray diffraction a...
Samples of ceramic systems Y₂O₃-ZrO₂-SrTiO₃ and Y₂O₃-ZrO₂-SrTiO₃-BiScO₃ were obtained. It was establ...
La0.4Ba0.6Ti0.6RE0.4O3 (where RE =Y, Yb) powders were synthesised by the mixed oxide route. Accordin...
The Curie temperature and the ideal thermal hysteresis of Pb1-y/2(Zr1-xTix)1-yNbyO3 (0.03≤x≤0.04, 0....
The purpose of this investigation was to conduct a crystallographic study of the PbZrO₃-PbTiO₃-BiFeO...
The ceramic system Y2O3-ZrO2-SrTiO3-BiScO3 was synthesized by the reaction method in the solid phase...
ABSTRACTThis article investigates the sintering temperature effect on microstructure and dielectric ...
yesFor the first time, ceramic solid solutions of (1-x)SrTi0₃-xBiSc0₃ system with x=0,0.05,0.1,0.2,0...
This paper presents the results of obtaining and investigations of Pb1–xBax(Zr1–yTiy)1–zSnzO3 (PBZTS...
Since ceramics in the PbZrO3–PbTiO3 binary system display excellent piezoelectric properties and tho...
Ceramic samples of the (1–x)SrTiO3–(x)BiScO3 system with x = 0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5 ha...
Designing new materials with unique properties requires scientifically substantiated approaches to p...
High permittivity barium titanate zirconate (BTZ) is often used for dielectrics in commercial multil...
Designing new materials with unique properties requires scientifically substantiated approaches to p...
Piezoelectric ceramics are used in a wide range of technologies due to their ability to couple mecha...
(1 − x)BaTiO3–xBiGdO3 ceramics were prepared by the solid state reaction method. X-ray diffraction a...
Samples of ceramic systems Y₂O₃-ZrO₂-SrTiO₃ and Y₂O₃-ZrO₂-SrTiO₃-BiScO₃ were obtained. It was establ...
La0.4Ba0.6Ti0.6RE0.4O3 (where RE =Y, Yb) powders were synthesised by the mixed oxide route. Accordin...
The Curie temperature and the ideal thermal hysteresis of Pb1-y/2(Zr1-xTix)1-yNbyO3 (0.03≤x≤0.04, 0....
The purpose of this investigation was to conduct a crystallographic study of the PbZrO₃-PbTiO₃-BiFeO...