The cyclic-oxidation behavior of Ti3SiC2-base material was studied at 1100°C in air. Scale spallation and weight loss were not observed in the present tests and the weight gain would just continue if the experiments were not interrupted. The present results demonstrated that the scale growth on Ti3SiC2-base material obeyed a parabolic rate law up to 20 cycles. It then changed to a linear rate with further increasing cycles. The scales formed on the Ti3SiC2base material were composed of an inward-growing, fine-grain mixture of Ti022 + SiO2 and an outward-growing, coarse-grain TiO2. Theoretical calculations show that the mismatch in thermal expansion coefficients between the inner scale and Ti3SiC2-base matrix is small. The outer TiO2 layer w...
International audienceThe Ti3AlC2-, (Ti,Nb)3AlC2- and Ti2AlC-based materials turned out to be more r...
Ti3SiC2 ceramic bulk with a relative density greater than 99% was prepared by hot pressing sintering...
A newly developed Ti\u201346Al\u20136Nb-0.5W-0.5Cr-0.3Si-0.1C alloy was oxidized isothermally and cy...
Ti 2AlC ternary carbide is being explored for various high temperature applications due to its stren...
Ti-6Al-2Sn-4Zr-2Mo is one of the most common titanium alloys for aerospace industry. This alloy expe...
Ti-6Al-2Sn-4Zr-2Mo is one of the most common titanium alloys for aerospace industry. This alloy expe...
MAX phases display a unique combination of characteristics of both metals and ceramics, and unusual ...
The oxidation of Ti3SiC2 in air from 25 to 1450 degrees C is characterised by differential thermal a...
Depth-profiling of elemental composition at the near surface of air-oxidized Ti3SiC2 was studied by ...
The isothermal and cyclic oxidation behaviour of the intermetallic Ti-48Al-2Cr (at.%) alloy were stu...
Ti2AlC ternary carbide is being explored for various high temperature applications due to its streng...
International audienceThe oxidation resistance of MSi2 compounds with M = V, Ti, Cr was investigated...
High-temperature oxidation behaviour of Mo-40Ti-30Si (at.%) alloy was investigated in the temperatur...
International audienceIn this work, oxidation mechanisms were studied in fine-grained (FG) and coars...
The nucleation and growth of oxide scale at the early stages of oxidation of Ti3AlC2 ceramics was st...
International audienceThe Ti3AlC2-, (Ti,Nb)3AlC2- and Ti2AlC-based materials turned out to be more r...
Ti3SiC2 ceramic bulk with a relative density greater than 99% was prepared by hot pressing sintering...
A newly developed Ti\u201346Al\u20136Nb-0.5W-0.5Cr-0.3Si-0.1C alloy was oxidized isothermally and cy...
Ti 2AlC ternary carbide is being explored for various high temperature applications due to its stren...
Ti-6Al-2Sn-4Zr-2Mo is one of the most common titanium alloys for aerospace industry. This alloy expe...
Ti-6Al-2Sn-4Zr-2Mo is one of the most common titanium alloys for aerospace industry. This alloy expe...
MAX phases display a unique combination of characteristics of both metals and ceramics, and unusual ...
The oxidation of Ti3SiC2 in air from 25 to 1450 degrees C is characterised by differential thermal a...
Depth-profiling of elemental composition at the near surface of air-oxidized Ti3SiC2 was studied by ...
The isothermal and cyclic oxidation behaviour of the intermetallic Ti-48Al-2Cr (at.%) alloy were stu...
Ti2AlC ternary carbide is being explored for various high temperature applications due to its streng...
International audienceThe oxidation resistance of MSi2 compounds with M = V, Ti, Cr was investigated...
High-temperature oxidation behaviour of Mo-40Ti-30Si (at.%) alloy was investigated in the temperatur...
International audienceIn this work, oxidation mechanisms were studied in fine-grained (FG) and coars...
The nucleation and growth of oxide scale at the early stages of oxidation of Ti3AlC2 ceramics was st...
International audienceThe Ti3AlC2-, (Ti,Nb)3AlC2- and Ti2AlC-based materials turned out to be more r...
Ti3SiC2 ceramic bulk with a relative density greater than 99% was prepared by hot pressing sintering...
A newly developed Ti\u201346Al\u20136Nb-0.5W-0.5Cr-0.3Si-0.1C alloy was oxidized isothermally and cy...