In hypersonic flow over slender bodies an important concern is the influence of nose bluntness on the viscous boundary layer behavior. This is particularly important in the consideration of boundary layer instability and transition. There exist numerous treatments, both theoretical and experimental on this subject. Representative excellent examples are [1] and [2] In this study we use the deviation from sharp–body theory of the heat flux distribution as obtained from computations of viscous perfect–gas flow over blunted slender bodies at zero incidence to estimate the point where the body has forgotten that it is blunt
The existing database of transition measurements in hypersonic ground facilities has established tha...
Pressure distribution and flow fields of blunted cones at hypersonic Mach number
Large downstream movements of transition observed when the leading edge of a hollow cylinder or a fl...
In hypersonic flow over slender bodies an important concern is the influence of nose bluntness on th...
A numerical study has been conducted to investigate the effects of blunt leading edges on the viscou...
Hypersonic flows over cones and straight biconic configurations are calculated for a wide range of f...
Direct numerical simulation with up to 10 x 10(9) scale grid points based on graphics processing uni...
The M*ɪ.0 hypersonic, laminar, axisymmetric mean flows past blunt, circular cones at zero angle ...
This thesis focuses on secondary instability mechanisms of high-speed boundary layers over cones wit...
A numerical study was conducted to investigate the effects of blunt leading edges on the viscous flo...
A series of tests has been conducted at free-stream Mach numbers four and eight to determine the eff...
An investigation has been made to determine the transition characteristics of a group of blunt cones...
In this Letter, hypersonic boundary-layer transition was investigated on a large-scale cone with a h...
NOTE: Text or symbols not renderable in plain ASCII are indicated by [...]. Abstract is included i...
Depending on the cone half-angle and the inverse normal-shock density ratio, hypersonic flow over a ...
The existing database of transition measurements in hypersonic ground facilities has established tha...
Pressure distribution and flow fields of blunted cones at hypersonic Mach number
Large downstream movements of transition observed when the leading edge of a hollow cylinder or a fl...
In hypersonic flow over slender bodies an important concern is the influence of nose bluntness on th...
A numerical study has been conducted to investigate the effects of blunt leading edges on the viscou...
Hypersonic flows over cones and straight biconic configurations are calculated for a wide range of f...
Direct numerical simulation with up to 10 x 10(9) scale grid points based on graphics processing uni...
The M*ɪ.0 hypersonic, laminar, axisymmetric mean flows past blunt, circular cones at zero angle ...
This thesis focuses on secondary instability mechanisms of high-speed boundary layers over cones wit...
A numerical study was conducted to investigate the effects of blunt leading edges on the viscous flo...
A series of tests has been conducted at free-stream Mach numbers four and eight to determine the eff...
An investigation has been made to determine the transition characteristics of a group of blunt cones...
In this Letter, hypersonic boundary-layer transition was investigated on a large-scale cone with a h...
NOTE: Text or symbols not renderable in plain ASCII are indicated by [...]. Abstract is included i...
Depending on the cone half-angle and the inverse normal-shock density ratio, hypersonic flow over a ...
The existing database of transition measurements in hypersonic ground facilities has established tha...
Pressure distribution and flow fields of blunted cones at hypersonic Mach number
Large downstream movements of transition observed when the leading edge of a hollow cylinder or a fl...